Makita DC18RC 18V Lithium-Ion Rapid Optimum Charger

Product Information

The MAKITA DC18RC has a cooling fan and Active 3 Controls. This means that during the loading of the charging voltage, charging current, and temperature is held in the holes. The cooling system blows cool air into the battery. As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated. The Makita DC18RC battery charger is an efficient device designed for charging Makita batteries with a capacity of 3000 mAh. With an input frequency of 50/60 Hz, it ensures a smooth and reliable charging process. To reduce risk of injury, charge only Makita type rechargeable batteries. Other types of batteries may burst causing personal injury and damage. A single Flashing green light means that the charger is in standby mode. It is connected to an AC power supply and is ready to start chargingyour batteries.

If the Yellow light does not flash, it could indicate that it is “ conditionally charging” the battery. The battery can be charged in spite of the yellow warning light. But the charging time will be longer than usual in this case. The Battery charger should be sent to repair or maintenance if the yellow warning light flashes frequently. Flashing red light on a Makita DC18RC battery charger signals a Delay in charging.This can happen if the battery is either too hotor too cold. If the battery is belowor abovethe ideal operating temperature charging may not start.

Makita DC18RA 18v LXT Li-Ion Fast Battery Charger 14.4 / 18v

A flashing yellow light indicates a cooling abnormality. A yellow light will start to flash if the Cooling systemhas come into operation. The battery will still charge in spite of the warning light, but it may take longer than usual. Most Makita power tools are protected by “ STAR” protection, this detects conditions that threaten to over-load, over-dischargeor overheatthe tool or battery. The tool will automatically cease operation,this prevents any damage to the battery. Built-in CPU - gathers information from the battery's memory chip to determine optimum charging method

The followings show the symbols used for the equipment. Be sure that you understand their meaning before use. The Makita DC18RC battery charger always lights up red/green and the battery cannot be charged. There are several possible causes for this problem:As a result, high temperatures occur in the battery, so that the battery life is extended, and the charging process is accelerated This is how the charger looks when plugged in but with no battery in it. The green light will flash continuously, this just means the charger is plugged in but there is no battery inserted in it. A (dusty) Makita battery charger Solid Red Light Before using battery charger, read all instructions and cautionary markings on (1) battery charger, (2) battery, and (3) product using battery. Inserted battery has Over-discharged, this can happen if the power tool has not detected that the battery is low and continued to drain power from it.