Superior Tool 37516 Pipe Cutter, Grey/Black

Product Information

First off, these pipe cutters allow you to cut pipes larger than 2 inches. A standard pipe cutter will be very effective for smaller pipes, but are useless for larger pipes. An internal pipe cutter is able to cut upward of 10 inches, making it much more effective for large pipes. Internal pipe cutters are also relatively cheap compared to manual and ratcheting pipe cutters. The most useful aspect to an internal pipe cutter is that it allows you to cut PVC pipes that are in the ground and in tight spaces.

Pipe Cutting Tool - NuTech Innovations Inc Excalibur Pipe Cutting Tool - NuTech Innovations Inc

When this generic tool got jammed, there was no choice but to just leave it. He had dreamed of a solution for this problem for years. One day Fraser was working on a project when the tool jammed and he had to let it go. It was dancing around by itself, destroying the expensive custom tiles in the room. That was the day he pulled the plug and that was that. He turned up with a prototype the next day.Used to cut off pipes below floor level or in the ceiling in new construction, around pools, and for replacement of closet flanges. Once the blade is inserted, connect the power source to the drill, and place the blade into the pipe you are looking to cut. A radial encoder gives real-time readout in degrees of progress through the cutting operation. The cutting head is extended by a pre-charged accumulator, allowing it to ride over seam-welds or non-conformities without any risk of damage to the manipulator assembly.

Internal pile cutters - Acteon Internal pile cutters - Acteon

Line up the blade, and turn on the drill. The pipe cutter will begin spinning. Rotate the drill in a circular motion as the blade spins for a consistent cut. Fraser, a licensed plumber, got frustrated there was no fast and safe way to cut plastic pipes in hard to reach places. Existing work-practices to cut these pipes involved the use of an angle grinder, often with the guard removed to gain access to the inside of the pipe held within the concrete flooring. In addition, often digging around the outside of the pipe was required to get the pipe cut at the right height, very slow and potentially dangerous work. Once the cut is complete, power off the drill and use a deburring tool to clean the edge of the tubes.The EzyGrind Inside Pipe Cutter is the fastest, safest and easiest-to-use internal pipe cutter plumbing tool available today.

Sutton 36mm Ezygrind PVC / HDPE Pipe Cutter Sutton 36mm Ezygrind PVC / HDPE Pipe Cutter

Fresh thinking and technical innovation for wells and offshore infrastructure installation and removal. NTI developed the Excalibur product line to fill a need for high quality abandonment tools, with a low environmental footprint. Quality in tool design is very important to NTI, as is our commitment to support the Excalibur product line to achieve success in our customer’s field operations. He designed this pipe cutter with his childhood friend, the #2 engineer for the V8 Super Car Series Team - Triple Eight Racing. Using the same top-of-the-line materials used with the race cars, they crafted a pipe cutter like no one had seen before. They created a tool that cuts 6x faster than any other tool with the longest-lasting blade and cleanest cut in one single cutting action. Acteon Group Ltd, Ferryside, Ferry Road, Norwich, Norfolk NR1 1SW Acteon Group Ltd is registered in England, number 4231212