Kreg Straight Edge Guide XL-8 Ft

Product Information

Then secure the guide to your material using the low-profile GripMaxx™ clamps that are built right into the guide.

Faithfull SL8 Screeding Level 2400mm/8ft 3 Vial and Grips Faithfull SL8 Screeding Level 2400mm/8ft 3 Vial and Grips

This way, if the saw accidentally wanders from the straightedge, it won’t ruin the piece you’re keeping. Position your hand on the wide section of the saw shoe, not on the narrow side near the blade, and grip the shoe with your forefinger and thumb.

Guided cutting makes it easier than ever to see exactly where you’ll cut so you can get the results you expect. Even if your woodworking is limited to an occasional weekend project, you’ll eventually need to cut a narrow piece from a long board or sheet of plywood. Then use the measurement obtained in Photo 1 to make a second set of marks for the straightedge on the “keeper” side of the first marks.

McMaster-Carr Precision Straightedges | McMaster-Carr

Photo 1 shows how to make a test cut and measure the distance from the edge of the shoe to the edge of the blade. When you begin a cut, barely nick the plywood with the blade to make sure the blade just touches the outside edge of the cutting mark. If you want to create a straight edge on a crooked board, mark the board with a straightedge or chalk line instead. Circular saw blades come in a variety of sizes and shapes, so it is important to choose the right blade for the job.

The aluminum construction is sturdy and provides a smooth surface that will not damage your workpiece. We used the BORA clamp Edge to guide our circular saw for straight, accurate cuts on plywood sheets.

Kreg KMA4700 8ft 2438mm Straight Edge Guide XL - FFX

The circular saw track is a 3rd person experience that allows the player to control a circular saw via a track. As you cut, direct pressure straight ahead through the handle of the saw, and concentrate on the line.The guide can be attached to any circular, rotary, jig, or router table and has a 24in / 62cm cutting capacity. Work with material up to 8 feet and get the cuts you need – whether you’re using a circular saw, jigsaw, or trim router. A good guide will have a solid clamping system that keeps it securely in place while you are sawing, as well as a variety of markings and measurements to help you accurately line up your cuts.

Kreg Straight Edge Guide XL 2438mm (8 ft.) - Yandles

All have their own advantages and disadvantages, so it is important to choose the material that will best suit your needs. The Bora 50 is a straight cut guide for circular saws that makes it easy to cross-cut plywood sheets and rout dados.

There are a variety of different materials that straight edge guides can be made of, including plastic, aluminum, and steel. We are no longer supporting IE (Internet Explorer) as we strive to provide site experiences for browsers that support new web standards and security practices. Connect the fence to the base with carriage bolts and attach the saw shoe to the base with small screws. The DCT Aluminum Pro Grip Clamp Straight Edge Wood Cutting Table Saw Guide is a great way to improve your accuracy when cutting wood.