Joined in 2023 
82 
63 About this deal
The Kanto YU4 is a pair of bookshelf speakers with Bluetooth capabilities. This pair is small, compact, and just the right size for an office, home office, or study setup. These speakers are simple but sleek with a matte surface that makes them resistant to scratches, marks, and discoloration.
If your turntable does not have a built in Phono Pre-Amp, use the "Phono" setting on the Phono switch. When the volume is high, this system can produce noise levels that could permanently damage your hearing. YU4 is a self-powered speaker system. Do not connect the speaker terminals to the speaker intputs of a stereo amplifier. Damage may occur. Use only the power cord provided with the speakers. Connecting Audio Sources Here is a scaled size comparison of these two speakers to give you an idea how their external dimensions compare: The Kanto YU4 excels in design, form, and function. There are also some disadvantages of this product which will be discussed later. Press the Bluetooth button ( ) on YU4's remote to select it as the input source. The Bluetooth LED (blue) will flash to indicate that YU4 is in pairing mode.Note that APU is always turned on when power is applied, but will only work after automatic power down. APU will not work if unit is manually switched to standby using the remote or control knob. Some models of turntables include a built-in Phono Pre-Amp. If your turntable has a built in Phono Pre-Amp, DO NOT use the Phono setting on the RCA switch. Doing so will void your warranty and could cause severe damage to your speakers. Connecting a Subwoofer If you do not find the Auto Power-up (APU) feature useful, you can disable it by pressing the Balance Reset button on the remote and holding it for 5 seconds. The Status LED will blink once to indicate that you have disabled the APU feature. To enable the APU if you have disabled it, simply press and hold the Balance Reset button again for 5 seconds. The Status LED will blink twice to indicate that you have enabled the APU. Verify that the speaker wire is connected to the same color terminals on the active speaker and passive speaker. If using the optical input, set the source's output to stereo — not surround, Dolby, DTS, or 5.1 — and set the sample rate to 96Khz or lower.
connect your turntables grounding wire to the grounding post (not all turntables feature a ground wire)Set the volume of the source to its highest level. Low source volume can negatively affect dynamic range. Speaker Stands: Stands bring your bookshelf speakers to ideal height (rule of thumb is to have the tweeter level with your ear in your listening position), helps stability and acoustical isolation. One of the predecessors of the YU4 is the YU, a Bluetooth 4.2-powered bookshelf speaker system that offers impressive sound thanks to its silk-dome tweeter and Kevlar drivers.
Let’s dive into the different features of the YU4 so you can better gauge if this is the right desktop speaker for your needs. Ease of Use – 4.5 out of 5 Thank you for choosing YU4 Powered Speakers, designed by Kanto in Canada. YU4 outputs 140W Peak power into 4 Ohm speakers, for remarkably bold and clean sound. Excellent sensitivity and frequency response provide deep thumping lows and clear, scintillating highs. YU4 is an amazingly flexible speaker system that can accept five input sources and connect to a subwoofer for enhanced low frequency response. Additionally, it is equipped with the latest Bluetooth technology and a USB port for charging your devices. YU4 has a universal input power supply and can be used worldwide from 110V AC to 240V AC. The space between the two speakers and the distance from the listener is important. If the speakers are positioned too close or too far apart, stereo imaging will not be fully developed.Set the bass and treble levels to the default setting by pressing the EQ reset button on the remote. The YU4 is designed to provide the best quality sound with its enhanced drivers and dome tweeters. The cabinets are handcrafted to make sure you get the best results each time. It connects to almost all audio equipment including a vinyl record player and it can also connect wirelessly via Bluetooth to any smartphone, tablet, or PC. YU4 is equipped with a RCA connector to provide output signal to a powered subwoofer. Simply connect a single RCA cable from the SUB OUT connection on the YU4 to the AUDIO INPUT on your subwoofer. If your subwoofer has a stereo L/R RCA input, either input will work.
YU4 is designed to perform optimally positioned at least 8" from the rear wall in an average listening room. However, it may not be possible to install the speakers in this position and since rooms vary in shape, size, and furnishing, a certain amount of experimentation is necessary to determine the most suitable position. YU4 features a high quality DAC (digital-to-analog converter) for the optical inputs that supports data streams up to 24-bit/96 kHz resolution. Take note of the following behavior and functionality during Bluetooth operation. When you are successfully connected, the Blue LED will be lit solid, and your device will show as connected to 'YU4 by Kanto'. Ensure that the balance setting on the source is centered. Some sources may not have an adjustable balance setting. Ensure that the balance setting on the speakers is centered by using the balance reset button on the remote.Under the hood are the Bluetooth AptX and the Qualcomm apt XTM that will let you stream from any Bluetooth-capable device even when you're across the room. The integrated phono preamp can connect to vintage audio equipment such as turntables and tuners as well as audio receivers, modern home theater systems, and many more. When using AUX with a PC, reduce the volume of the speakers and increase the PC volume. Also try connecting the speaker ground terminal to the PC chassis ground if noise persists. The Audioengine HD3 wireless speaker can connect to any Bluetooth-capable device even from 100 feet away. This works with all types of devices and equipment including old-style turntables, TVs, laptops, desktops, and gaming consoles. Verdict We recommend the Kanto sub6 or sub8 powered subwoofer with crossover and volume controls. Most quality subwoofers offer these controls, which allow you to customize the amount of bass you will experience.
Great Deal 
New Comment