Joined in 2023 
82 
63 About this deal
Product quality problem caused by installation not following the requirements or instructions for the Products; or Seasonic PRIME based units experience shutdowns with RTX3080/3090 (and possibly RX6900 XT) GPUs. The cause is not the OCP tripping but a PSU design flaw as evident by the PSU not latching off on shutdown and 1000W+ models being affected too. Doesn’t manifest in 100% cases as it’s also dependent on motherboard model and GPU OC. Seasonic provides a replacement 24-pin ATX cable to fix this via support. Appears to be fixed post 2021 although there’s no official confirmation from Seasonic. Silverstone | DA Gold 1000W – DA-R Gold 1000W – ET-MG – Strider Gold S [F-GS] v3 – SFX SX-G 750W [SFX]
Pelican Coolers | Pelican
Tier A - OTP should be tested (if not tested - detier to SP subtier), working and set below 200°C (if it's set higher - detier to LP subtier), required to be based on ZVS primary topology (LLC or phase shift resonant), have ripple below 50mV under all load situations up-to 110% overload, <=3% transient response on 12V rail, <=3% 12v voltage deviation from nominal. Fan with =>30k hours MTBF at 40°C (generally non-plain-sleeve bearing) or be fanless. All capacitors rated for 105°C. Minimum 18AWG gauge wires for hot 12V leads on GPU/EPS/ATX cables, on pig-tail cables - at least to the first connector, 20AWG to the second or for ground leads. ATX 3.0 subsection requires an Intel DB entry or third party power excustion tests. Please don’t worry about that. The amp glow is pretty normal actually. You may learn “What is Amp glow and how do I manage it?” here: https://astronomy-imaging-camera.com/faqDamage caused by the improper User operation during the period of shooting or use, such as using without the equipment protection or direct shooting of the sun; or EVGA | Supernova : G2(L) [11] / G3 / G6 ( <=750W/ =>850W) / G7 / P2 [11] / P6 ( <=750W/ =>850W) / T2 [11] Silverstone | Extreme-R Platinum 850W [SFX] [14]– HELA-R [HA-R] 1300W [14]– SX-PT 750 – SX-R 1000W [SFX-L] [14]
Razer Phone Cooler Chroma | Razer Smartphone Cooling Fan - Razer Phone Cooler Chroma | Razer
This review represents over 600 combined hours spent using, abusing, and meticulously testing over 40 different ice chests since 2016 — not including the time spent researching hundreds of new and promising models to find the ones worthy of inclusion. We ran and re-ran insulation tests under controlled but harsh laboratory conditions. We dragged our test subjects through the gravel, sand, mud, and grass while road-tripping, tailgating, camping, and hanging out on the beach. We asked our friends and family, who span three generations, to help us dive into these coolers (sometimes literally) and identify the top performers. From being thrown into vehicles, dropped from waist height, jumped on by a 200 lb tester, dragged across hot surfaces, yanked on, jerked around, and otherwise abused, these chests have seen it all. The ASI294MC Pro camera includes a 256MB DDR3 memory buffer to help improve data transfer reliability. Additionally, the use of a memory buffer minimizes amp-glow, which is caused by the slow transfer speeds when the camera is used with a USB 2.0 port. Antec EA Pro Gold has versions for Chinese market made by FSP on completely different, worse, group-regulated platform (tier E). Source #1, #2.
for tier A : <=1.5% 12V peak to peak, <=2% transient response on 12V rail, <=3% deviation from nominal 5V rail, <=30mV max ripple on the 12v rail(s) including 110% load tests, transient response within ATX spec on 5V rail. One exclusion allowed for test data point outside of required range. Minimum 18AWG cable gauge for hot 12V leads. Includes requirements for blue color (quiet operation). Speculative position subtiers - units with barely sufficient info on. Meaning at least primary and secondary topology is known. But tier A requries either a full teardown to confirm high similiarity with the unit from normal priority or a Cybenetics report available.
Great Deal 
New Comment