DFRobot Gravity: Analog CO2 Gas Sensor for Arduino | CO2 Gas Detector

Product Information

Please ensure the analog pin used for the connection is the same as the one used in the Arduino UNO code. In this section, we will understand the features, specifications, and connection options available on the CO2 sensor.

These libraries can be downloaded from the Library Manager in the Arduino IDE and install it from there. The 103 third parties who use cookies on this service do so for their purposes of displaying and measuring personalized ads, generating audience insights, and developing and improving products. const byte Td = 0 ; //deg Celcius 39 const byte Tw = 1 ; 40 const byte RH = 2 ; //relative humidity 41 const byte CO2 = 3 ; //ppm 42 const byte pWd = 4 ; //kPa 43 const byte pWw = 5 ; 44 const byte fRHT = 6 ; //- 45 const byte Rs = 7 ; //kohm 46 const byte numData = 8 ; //number of data in data [] 47 48 49 const String degC = String ( "\\xC2\\xB0" ) + String ( "C" ) ; 50 const String labels [numData ] = { "Td" , "Tw" , "RH" , "CO2" , "pWd" , "pWw" , "fRHT" , "Rs" } ; 51 const String units [numData ] = {degC ,degC , "-" , "ppm" , "Pa" , "Pa" , "-" , "kohm" } ; 52 53 54 void setup ( ) { 55 pinMode (Td_sensor , INPUT ) ; 56 pinMode (Tw_sensor , INPUT ) ; 57 pinMode (CO2_sensor , INPUT ) ; 58 pinMode (checkLight , OUTPUT ) ; 59 60 lcd . If, for any reason, you would like to unsubscribe from the Notification List for this product you will find details of how to do so in the e-mail that has just been sent to you!It is presumed that CO2 readings are equally influenced by temperature and RH as ammonia readings in given graphs 42 const double Intercept = 1.

Using the SCD30 with Arduino is a simple matter of wiring up the sensor to your Arduino-compatible microcontroller, installing the Adafruit SCD30 library we've written, and running the provided example code. Finally, you must tell the software which COM port on your computer the Arduino Uno board is connected to.Hi, I'm just curious how you know the load resistor is 1k ohms based on the value written on the back of the gas sensor? In this project, we are going to use an MQ-135 sensor with Arduino to measure the CO2 concentration. With a perfectly blended team of Engineers and Journalists, we demystify electronics and its related technologies by providing high value content to our readers. You have to measure the zero-point voltage for your board and update the line below in the Arduino sketch.