3DLAC spray adhesive for perfect adhesion to the 3D printer print bed, 400 ml

Product Information

In our experience, the the first time you use 3DLAC on your build surface apply two light coats (remember to shake the bottle before spraying). spray is the best solution against warping by providing a great adhesion used filaments such as PLA, ABS, PETG and more materials.

To use this product you only need to press the applicator against the printing surface for a couple of seconds and once the adhesive flows, it spreads a light layer of product over the printing area. Credit subject to status, UK residents only, Box Limited acts as a broker and offers finance from PayPal Credit. Depending on the 3D printed material, the effect may vary, which is why it is highly recommended to test the 3DLac Stick with certain materials ( ABS, PP, Nylon or advanced polymers) before 3D printing the final part. If you choose to decline, then we will only use functional and analytical cookies and you will continue to see random advertisements. A simple light spray on a smooth surface is enough to ensure that the first layer of plastic remains completely fixed to the base.We’ve harnessed innovation and technology to create a one-of-a-kind solution that enhances the quality and precision of your nylon prints. function is to hold the first layer of plastic so that it does not move at the start of printing, preventing unwanted failures in the early 3D printing process. PLUS is a high quality anti warping adhesive that you spray to your heated print bed to help your prints stick. After printing a single piece re-spraying 3DLac right in the area of the piece it is finished printing, the rest of the surface with spray every 3-4 prints is enough.

This facilitates application, allows for control over the amount of adhesive used, and a more precise and even distribution of the product on the printing base. All users who prefer use lacquer and not Kapton Tape, can be achieved with a sprayed or vaporized light on the glass bed base that the first plastic layer is fixed completely to this base bed. Its new formula unscented double locking is perfect for holding and removing the piece once printing is complete.Once the printed piece gets cold, it can be taken off smoothly and without any damage to your 3D printed project. On the one hand, there is the traditional spray lacquer version that allows the product to be easily and quickly expanded; and on the other hand, the new version in liquid vaporizer that allows to concentrate more the product and avoids that it is finished sticking it in the mechanical parts of the 3D printer as it usually happens with the 3DLac in spray due to a bad use of it. By accepting these services, we are able to show you videos or other media content hosted by external providers.

After your print is ready, we recommend that you let the print bed cool down before removing your 3D printed object from the bed.When our filament users asked what we recommend for bed adhesion, we would always suggest this product. Plus spray adhesive in a practical pump spray bottle based on thermoplastic copolymers for the 3D printing FFF or FDM technology. A light 3DLAC mist over the surface is enough to completely hold the first layer of plastic to the base.

The special formula of the 3DLac Stick facilitates the removal of the part but it should be done very carefully nonetheless.It should always be applied on a clean and dry surface by gently pressing the applicator against the printing surface for a few seconds until the product starts flowing. Tip: Before you remove the printed parts or the print model from the plate, wait until the temperature drops below 30 °C! The printing base should be allowed to cool down (at least to 30 ºC) before the part is removed from the printing bed.