Joined in 2023 
82 
63 About this deal
The basic Jumbospot (which is actually tiny) has two main components, a Raspberry Pi Zero and an attached MMDVM board known in Pi-speak as a HAT—Hardware Attached on Top. I found the cheapest way to get a duplexer “professionally” tuned while still doing it your self, is with a USB Vector Network Analyzer or VNWA. Net Hangtime is the amount of time the MMDVM waits after the end of an incoming network transmission from a distant station.
After the changes are applied, scroll down and you will see a new configuration box named “DSTAR Configuration. I have worked with this particular software package before so I have some understanding of how it works and how to use it. This can be a device that opens doors to worldwide contacts for those with Tech licenses or hams who live in HOA neighborhoods.Hello, I purchase an AURSINC duplex board that says it is capable of 144-148, 219-225, 420-475, 842-950. The way I did it was to get a spare SD card and load an image for the screen onto it and flash it to the screen using the Micro SD card slot on the back of the screen. After setting up the MMDVM duplex hotspot board, it is necessary to adjust the transmit and receive offsets in the MMDVMHost expert editor section. The board is a hat so it sits directly on top of the Raspberry Pi and uses the Pi’s GPIO pins to communicate with the Pi-Star Software.
Adjust the pots: If everything seems to work at this point, the next step is to tune the mmdvm’s adjustable audio pots. Uses Pi-Star digital software, the unit comes with an 8GB TF card, you can go to the PiStar web site, input your SSID and Password, this will create a new config. I like learning about new things so I contacted the author of the review asking for recommendations about hotspots and he suggested the Zumspot as being a decent pre-built hotspot that’s easy to get going. For example, you can talk with your D-STAR transceiver on DMR, and with your DMR transceiver on D-STAR networks. I’ve tried to contact the seller, to ask him if he knows the correct value to put in Pi-Star, but after days I still wait that he read my message.Now just pop the SD card into the back of your Raspberry Pi and connect your raspberry pi via an Ethernet cable directly to your router, and plug a normal Micro USB phone charger into the Micro USB power port on the RasPi. TFT files that other amateur radio operators (hams) have made available on a few different MMDVM Hotspot groups. Hotspots have been quite a recent addition to the Amateur hobby but it has grown more and more popular, starting with the likes of the DV4 Mini and now Pi-Star! I quickly learned all about the different modes it can be used with and spent some time upgrading it to the latest version of the software and fine tuning it.
Although transceiver suffers from overheating if used for TX as well(in case of hotspot), due to lack of a blower. Remote Password – This is the password used by the ircDDBRemote application as well as the command-line Remote Control application. My hotspot shipped with almost everything pre-configured including the settings for the OLED display.Jangan melupakan satu langkah penting - filter untuk produk yang menawarkan manfaat bonus, seperti gratis ongkos kirim dan retur gratis agar pengalaman berbelanja online Anda maksimal! Documentation – There are a lot of HAMs out there ready to help, but the actual UI itself is daunting. With my friend’s help, I tested the output frequency of the repeater/hotspot board without setting any TX offset and the transmit frequency (FRQ) was about 442. The two sets of pins are for the GPIO header on a Raspberry Pi and the SMA aerial socket needs soldering to the board. This simple creation has put the power back into the hands of radio operators around the world allowing them to build and tinker with digital voice systems, breaking down the barrier of needing expensive commercial hardware.
Great Deal 
New Comment