Evolution Power Tools 046-0001A R210CMS Compound Saw with Multi-Material Cutting, Bevel, 45 Degree Mitre, 3-Year Warranty, 1200 W, 230 V-Domestic, Black

Product Information

Even after tightening the nut underneath the mitre bed, there was still too much slop for this to be an accurate saw. Please note: That Klarna is an independent payment company and Evolution Power Tools Limited has no influence over whether your payment with Klarna is accepted or not. The optional diamond blade (sold separately) completes the package, enabling you to cut brick, stone, concrete and unglazed tiles. In addition, you should consider the speed at which the blade rotates and the weight of the tool, as these will impact on the control you have over the saw when using it. The slop in the mitre table, even when tightened down, wasn’t awful but made selecting the correct angle more difficult than it should have been.

With great ergonomics, an ambidextrous central handle, and a stable base the R210CMS+ Mitre Saw is a pleasure to use at home and on the jobsite. Using the patented Rage® technology, you can easily cut in steel, aluminium and wood (even with nails) with the same saw blade. He's established and run award winning companies, has been self employed most of his life and was co-host of the UK's first commercial joinery podcast. When cutting mild steel, this saw produces no heat, no burrs, and virtually no sparks, leaving cuts clean and cool to touch for an instant workable finish.One of the best things about the R210CMS compound mitre saw compared with the other ones on my list is the material used for the safety guard.

Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page. It is safer, faster and more economical than abrasive metal cutting saws - when cutting mild steel the saw produces no heat, no burrs and virtually no sparks.Compared with the handy hex key holder in the Metabo saw, I’m sure I’ll lose this little tool before long. Mild Steel, angled, box section, square tube, metal stud dry walling, rebar, plate (1/4 inch), unistrut. The R210CMS utilises multi-material cutting, which allows this compact machine to cut steel, aluminium and wood (even wood with nails), using just one blade. Features: Bevel Single Power Mains - 1,200W Blade Speed 3,750rpm Blade Diameter 210mm Max Cut 90x90° 125 x 55mm Max Cut 90x45° 125 x 35mm Max Cut 45x90° 85 x 45mm Max Cut 45x45° 85 x 35mm Weight 5. I now take it on any job where I might need to cut small pieces from metal bookcase strips and curtain poles through to trim mouldings and smaller skirting boards.