Makita HR2630 26 mm 3 Mode SDS Plus Rotary Hammer Drill,Blue

Product Information

Our new simple one-page decking identification guide, highlights the three key pieces of information you need to easily identify the type of decking you are working with and the specific fixing required. They mention that it's great value for the money and that it was delivered the following day at no extra cost. You can change your choices at any time by visiting Cookie preferences, as described in the Cookie notice. The modified operation mode change lever enables to switch from rotation to hammering mode and vice versa without rotating the chuck.

Excellent service, phoned me to just check that it was the 240V not the 110V I wanted as they noticed previously I had bought a 110V machine. The Makita HR2630 is a 26mm (1") combination, rotary hammer drill based on predecessor model HR2610 but with improved operation mode change lever. Alternatively, you can speed the process up by taking the tool to your nearest approved Makita Area Service Agent. The Makita HR2630 SDS Plus Rotary Hammer has a modified operation-mode change lever enabling a switch from Rotation to Hammering mode and vice versa without rotating the chuck. Any warranty claims outside of the 1st year but within the second or 3rd must be dealt with directly by Makita.Modified operation-mode change lever enables switching from 'Rotation' to 'Hammering' mode and vice-versa without rotating the chuck. The Makita HR2630 is also suitable for using with TCT or Diamond core drills up to 80mm when using the appropriate SDS+ adapter, when using for core drilling it must be used on the drilling mode only. The Makita HR2630/2 Corded SDS+ Rotary Hammer Drill has an impressive drilling capacity of 26mm in to concrete.

Makita (HR2630) SDS-Plus Rotary Hammer Drills 110v are 26mm (1”) combination hammers based on their predecessor HR2610, but with an improved operation mode change lever. Bosch Cordless Rotary Hammer Drill UniversalHammer 18V (Without Battery, 18 Volt System; With Round-shank Adapter, Drilling/Hammer/Chiselling; 2. Toolstop Limited is a credit broker, not a lender and is authorised and regulated by the Financial Conduct Authority (FRN 737231). An introduction to hammers: Hammers combine a pulsing pressure action, or 'hammer blow', with the rotating of a bit to break through denser materials.Model HR2630 is a 26mm (1") combination hammer based on predecessor model HR2610 but with improved operation mode change lever. To claim the full warranty a registration form may need to be completed - please check the paperwork enclosed with this product when purchased. We can arrange anchor testing for load capacity and quality of fastening for anchors in concrete and masonry, by trained engineers in accordance with the recommendations of BS8539. Tools must be registed online on Makita UK Warranty Registration Page within 30 days of purchase to qualify for the warranty extension otherwise a standard 1 year warranty will apply. On top of that, because their primary role is as a hammer drill, the impact rate – measured in either impacts per minute (ipm) or blows per minute (bpm) is definitely an important characteristic to consider.