SP2B Flowflex in Line Micro Pump, The Shower Power Booster is an Easy, Efficient & Effective in Line Micro Pump, DIY Solution to Poor Water Pressure, Suitable for All Plumbing Systems.

Product Information

I wasn't sure how the previous owners of 11 years put up with the almost non existent flow from the shower over the bath. TapBoost can be installed in certain zones within a bathroom, however the plug/power supply must be outside of the bathroom and the installation must adhere to the latest I. If multuple outlets suffer from poor natural flow, Salamander pumps have a range of products that are suitable that you can find here .

After purchasing two Power Boosters to update a shower system on a rental property I can only say how pleased I was with the results obtained.

That’s why the size of your new installation is something to keep in mind, especially if you don’t have a ton of spare space to work with inside your home. The only reason not to install these over a more conventional pump is to make the job more expensive as far as I can see. TapBoost provides an easy to install, quiet, cost-effective solution when a tap, toilet, dishwasher or washing machine suffers with poor water flow. Company where very informative of their product and where well read into the market for its use in general.

It uses a fraction of the energy used by other comparable pumps and can be powered from any household socket. If the hot pipe near the cylinder rises into the loft, across and down to the outlet, an ‘inverted U’ is created which may trap a column or air with no means of escaping. products_related:23389,19255,18590,23370,23371,23372,17805,20467,22850 sku:22904 BESt 6th Oct 23 Plumbing /i/n/in-line-automatic-shower-power-booster-sp2b_min_22904_transparent_1. But, not every family uses several bathrooms to shower in (or prefers extremely high pressure), so here’s a mini-guide to help you find the sweet spot for your needs.In particular the HW feed used to be very poor due to air in the system - the pump eliminates this entirely. If the cold water tank is more than 600mm above the shower head, then you have a positive head system.

To figure out which system you have, all you need to do is understand the location of your cold water tank to your shower head.Well, this Stuart Turner Showermate Shower Pump does just that — covering your purchase for a whole 3 years! lpm TapBoost will increase the flow up to 7lpm (provided there are no restrictions in the pipework/outlet). In-line automatic shower power booster improves existing water flow to taps and showers without the need for a cylinder shower pump flange.