High performance backup battery JST PH 2 0mm 3 pin connector 3 7V 1200mAh rechargeable lithium polymer battery lipo for gps dvd recorder e-book camera room 603450 Baifantastic

Product Information

Count on this charger for quick and efficient battery replenishment, ensuring your batteries are ready for action without delay.

Answer again: If it is the Tianchao, there is no problem, pay attention to the positive and negative poles. I presume the original battery relies on the tablet's own charging circuitry which monitors a thermistor in the battery via the third wire for safely charging. Supplied with T-Bar to 3 Pin screw down connecting lead (33cm length) specific to Pro Rider or Stowamatic Trolleys. We do NOT accept any responsibly for damage, injury or death caused by improper use of these batteries!Please include what you were doing when this page came up and the Cloudflare Ray ID found at the bottom of this page. Keeping your batteries loose, such as in your pockets, is a good way to have your batteries fail and seriously harm you. On basic batteries this is a connection to a thermistor, used to prevent overcharging the cell, by allowing the rise in temperature to be accurately measured, as the voltage of the cell is dependent on temperature.

The thermistor will be a standard 10kohm one but if its not integral to the pack it might as well be a 10k resistor as it won't detect thermal runaway soon enough to act in shutting the charge off. You will have to contact the charger manufacturer to ensure it can charge these batteries without damaging them.To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. The problem with these cells is the gas generated is flammable, and the materials that make the cell are both flammable and react with moisture. Please make sure to use the matching cable: 1 Ensure that the cable is not inserted into the protection board before connecting the cable; 2 Protect the board B-line (blue The thick color line is soldered to the total negative pole of the battery; the 3rd line starts from the thin black line connecting B-, the second line (thin red line) is connected to the positive pole of the first string of batteries, and the positive pole of each string of batteries is connected in turn, until the last one String B+; After the 4th cable is connected, do not insert the plug directly into the protection board, measure the voltage between each two adjacent metal terminals on the back of the plug. If you know exactly the operation of the three lines, please tell me where the three lines are connected? The middle pole is to give you the product motherboard to monitor the voltage of the lithium battery.