X AUTOHAUX 4pcs 12V Universal 6 Pins Car Power Window Switch Random Light Color

Product Information

I fitted a couple of these Britpart window kits and used Land Rover switches (YUF101521LNF) with them. So what cuts the power if your finger is still on the button as the end of the window travel, the motors u have themselves. Most purchases from business sellers are protected by the Consumer Contract Regulations 2013 which give you the right to cancel the purchase within 14 days after the day you receive the item. Doing it this way means that you can easily connect a window roll up module for an alarm: disconnect one wire from the window motor and connect to 12v.

They come apart easily and some careful cleaning of the switch contacts with alcohol or good contact cleaner can bring them back to life. Used to have an old VW Polo, 6n1, with a switch that externally looked identical as the LandRover ones. Also if someone would be able to give me an explanation into how the driver's side switch comes into the equation that would also be great, as I have no idea how that comes into the circuit. Finance is provided by PayPal Credit (a trading name of PayPal UK Ltd, Whittaker House, Whittaker Avenue, Richmond-Upon-Thames, Surrey, United Kingdom, TW9 1EH).If the new one has the same problem, exercise the wires going into the connector and the connector itself. I presumed originally that it must just be a faulty switch, so purchased a new one, however I'm still having the issue. To be honest having the switches lighting up whenever the ignition is on isn't a problem so i might just do that as it is easiest. I have two switches that look like that, but are very slightly different looking to each other - one has 4 useable pins (two pins are cut short), the other 6 pins.

Your products will be sent either same day or next working day after cleared payment unless otherwise stated on the listing. From my understanding the switch alternates the direction of the current running from the switch to the motor. Out of my 3 original switches 1 is good, 1 doesn't work at all, the 3rd works but the bracket has lost its shape and so it wont sit tight in the hole and if you try to add some more "pull" via the wires it just pulls it apart. com/content/news/p2_articleid/153 is for a page with diagrams showing the logic of how the switches work - scroll down the page a bit for those who were as confused as me! You loose the feature where you can open/close whilst ignition is off BUT you could get that back by replacing the IGN live with PERM live but I wouldn't do that as it affects the security.The switches were damaged last year when the centre console was removed and the contacts and rocker inside were lost. Out of the 3 original switches I have 1 good one, 1 temperamental and 1 that I think I duff and after a bit of testing 1 dead passenger window motor . You WILL loose some functionality, that's obviously what the ECU is for and Landrover are hardly going to pay out for something that has no use. If you only use it 10 times in the car's life then add a few bunches of 50 to clean the contacts, you're not really scratching the surface (except, of course, the surface of the tarnish on the contacts! So here we are, my thoughts on the best way to wire up electric windows with the 6 pin switch and totally ignoring the window ECU.

Often the switch panels just need cleaning, I've done two 406 and one 307 and brought them both back to life. Manufactured in compliance with stringent industry standards, the Pipeman's Installation Solution window switches provide superior performance, especially when in need of a robust solution and reliability.Here's the drawing, you're not exactly right, the passenger switch (H50) does NOT receive ALL the power from the battery, only the positive comes in directly; the earth (for the motor) comes from the driver's switch (H51). times out of 10 you can get them going again (especially if they have been sat unused for a while) by flicking them up and down repeatedly. Item color displayed in photos may be showing slightly different on your computer monitor since monitors are not calibrated same.

To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Some after-market 5-pin switches are lit, on those I believe the light is on whenever power is available at the switch. It will be based on fitting it to a defender but if someone in here gives me a circuit diagram for the disco then I'll include changes for that.The roll up module is wired to that effect so if I use the 6 pin switches I either have to supply the power the other way round with the illumination connection to gnd which would mean that the light would be permanently on with the ignition, like that but using a relay to create a neg switch from the side light live or wired as normal and rewire the roll up. I could really do with a hand in understanding how the electric window switches work in an 06 GP (3dr).