Joined in 2023 
82 
63 About this deal
When the V-slot is firmly seated around the nail’s shank, you rock the bar back to raise the head and then finish pulling the nail with the hammer’s claw. It can be used to cut a single line or both blades can be used in tandem to lay out a mortise or tenon. Instead of chiseling around the nail head to create clearance for a claw, you can place the dimpler over the nail, give the tool a sharp rap with your hammer, and-voilà!
Mokuba's Japanese cat paw nail puller bars and punches are well crafted tools, designed with a cat paw shape, optimized for the precise and effortless removal of nails, tacks, and pins in woodworking and carpentry applications.A standard tool in carpentry, it has a sharp V-shaped tip on one or both ends, which is driven into the wood by a hammer to capture the nailhead. As old growth wood has become much more valuable than the nails that hold it in place, there has been a move toward designs that take out nails with less damage yet. They also offer a face for knocking in pins AND there is a really handy magnet which can be used as a nail starter. This article includes a list of general references, but it lacks sufficient corresponding inline citations. Both nail puller claws are precise and sharp to remove imbedded or headless nails with ease and will grab nail shanks to pull finishing nails through removed molding to minimize damage to molding.
When the latter is sometimes is flattened on its long end to create a combination pry bar/nail extractor. Estwing's nail pullers have polished ends and are extremely strong and durable, these tools can pull a variety of fasteners.
Today, the norm is to have the two much narrower and more pointed heads offset 90-degrees (in plane) from one-another (allowing the bar to be pressed fully down when using the tip on the long end without damaging the surface the free end contacts). May get another of the same but wanted some opinions from this subreddit since the other carpentry subreddit probably gets their tools from Walmart. The other feature that sets apart this cat’s paw from others is its stubby “dimpler” cylinder, designed to help you extract nails that are flush or slightly below the surface. The allusion is to the fable of the monkey who wanted to get from the fire some roasted chestnuts, and took the paw of the cat to get them from the hot ashes. JB Tools provides this disclaimer to ensure there is no likelihood of confusion unduly influencing your decision to purchase this product, or any other, product from JB Tools, and to ensure there is no confusion as to the existence of any affiliation between JB Tools and the manufacturer of this product.
The nail puller claws are precise and sharp to remove embedded or headless nails with ease and minimal wood damage. He's a strong advocate for "raising the bar" in the construction trades and promoting the trades to youth. New designs have been introduced, including the Nail Jack and Nail Hunter nail pullers, which take a pliers-like approach to the old cat's paw design.The manufacturer also recommends using this tool as a small pry bar, for opening paint cans, removing car lining, etc. This one-hand-held puncher lets you mark drill holes anywhere while on the job, great to improve your pr. The Nail Hunter nail pulling design has very precise tips that actually come completely together at the ends, for removing finish nails. With machine made nails capped with distinct heads a cat's paw shaped puller appeared; however, the distinctly rounded shape of the extracting head - which gave the tool its name - is so broad at its V-shaped notch opening that driving it into a board to capture a nailhead does significant damage to the wood. These tools contain their own built in fulcrum, but can also be struck with a hammer to drive the tips of the tool into the wood with very little damage, allowing them to dig out nails that have been driven into wood at or below the surface.
Pressing the Escape (ESC) button will close the modal and bring you back to where you were on the page. holes are drilled into the back of the bar allowing the clamp to be used at a higher pressure without worrying that the arm might slide.To minimize this, and improve the performance of the tool all round, a Japanese-style very narrow, very pointed head has been adopted in recent years. JB Tools Non-Affiliation Notice and Disclaimer: JB Tools holds itself out as neither the manufacturer, an affiliate of the manufacturer, or an “authorized” distributor of this product.
Great Deal 
New Comment