Sony MDR-ZX330BT Bluetooth Wireless Headphones with NFC Connectivity - Black

Product Information

If the headset is not used for a long time, the indicator (red) may not light up when you connect the micro-USB cable to charge the headset. In this case, do not disconnect the micro-USB cable from the headset: wait a few minutes until the indicator (red) lights up. NOTE: For how to enter the pairing mode onyour Bluetooth device, refer to the manual supplied with the product. However, according to your headphones / speakers setup, you might not hear sound coming from the headphones/ speakersyet. If that's the case, go through the following additional steps below to set them as the default speakers.

For more information, visit the article: What’s the easiest way to pair my Bluetooth headphones with an Android phone? Although uncommon, it’s possible that two devices are successfully paired, but refuse to connect. If you’re sure this is not caused by a low battery level or a mismatch of Bluetooth profiles, delete the pairing information and pair the devices again to solve this glitch. You can delete ( Forget / Remove device) Bluetooth pairing information in your phone’s or computer’s Bluetooth menu. The above procedure is an example. For details, refer to the operating instructions supplied with your BLUETOOTH device. When pairing with a BLUETOOTH device that cannot display a list of detected devices or that has no display, you may pair the device by setting both the headset and the BLUETOOTH device to pairing mode. At this time, if passkey is set other than “0000” on the BLUETOOTH device, pairing cannot be done with the headset. Noise or sound skips may occur depending on the BLUETOOTH device connected with this unit, the communication environment or the usage environment.With many Sony Bluetooth devices, activating pairing mode is done by pressing and holding the pairing/power button on your device for about 7 seconds. You will often hear an audio cue or see a blue flashing LED to inform you that your device has entered pairing mode. Your device will remain in pairing mode for a few minutes and will turn itself off if the pairing procedure isn't successful. Hold it close to the NFC logo (e.g. left headphone cup on WH-1000XM4). You don't even have to power on your headphones. They will turn on automatically.

NOTE: If the device name is not displayed in the Bluetooth items, there is a possibility that the Bluetooth function is set to off. Set the Bluetooth function to on.

Step 1. Enter the headphones into pairing mode

NOTE: For how to enter the pairing mode onyour Bluetooth device, refer to the manual supplied with your product. Use the index on the left to navigate the Help Guide or select the search result which answers your question on the right. Frankly, the ZX330BT isn't something we'd feel comfortable tossing into a bag with a heavy 15-inch laptop and taking along with us on public transportation. Sound quality If pairing is not established within about 5 minutes, pairing mode will be canceled and the headset will turn off. In this case, start over from step 1. When you meet a new person, you usually introduce yourself first and exchange basic information. You won’t have to do this again the next time you meet your new acquaintance - unless you forget who they are or vice versa.

The headset can be paired with up to 8 devices. If a new device is paired after 8 devices are already paired, the paired device with the oldest connection time is replaced by the new one. Set the Bluetooth settings on your Android device to ON and delete the device information of the headphones or speaker. Turning Bluetooth OFF and ON again is especially useful when the device you want to connect to doesn't appear in the Bluetooth menu list. Turning Bluetooth OFF and ON again refreshes the list. This tip applies to smartphones, computers and TVs. Bluetooth pairing is similar. When two Bluetooth devices are pairing, they exchange information. They establish a connection and recognise each other in the future without any introduction - unless one device forgets the other one or vice versa.NOTE: If you Forget a device, it will no longer appear under ' Previously connected devices'. You'll have to tap ' Pair new device' to pair it again. The above procedure is an example. For details, refer to the operating instructions supplied with your iPhone. If the device information of the headphones or speaker is registered to your mobile device, use the following procedure to delete the device information, then reattempt pairing. Once BLUETOOTH devices are paired, there is no need to pair them again, except in the following cases: