Joined in 2023 
82 
63 About this deal
The Vyper and Magician have exactly the same values for position accuracy and nozzle diameter. The positional accuracy of both is 0.0125 millimeters for the x and y axes and 0.002 millimeters for the z axis. The diameter of the nozzle is 0.4 millimeters for both. Once print jobs start, there is a detailed display of the job, with controls as seen here. You can see lots of information, including the layer height, temperatures, motion system location, and the elapsed time. Technology Co.、Ltdは、OEM / ODMと3Dプリンターの販売を専門とするハイテク企業であり、さまざまなユーザーのニーズを完全に満たす2つのシリーズのDIYとWholeProfessionalMachineを所有しています。
The perfect starting point to do this are the verified default values for different filaments you will find in the next lines. From these starting values, you can further perfect your settings. You will learn how to do this later in the article. PLA Settings at a Glance In general, however, I found the interface usable, aside from these peculiarities, and was able to print quite a few items with the Magician X. Once in place, you then move to the “Extrude” menu on the touchscreen, which is hidden under the “Menu” item. hit “Load” on the touchscreen and the extruder will grab the new filament and extrude it successfully. Both devices also have a touchscreen, which makes it very convenient to use. However, the point here goes to the Vyper. At 4.3 inches (approx. 11 cm), the display of the Anycubic device is noticeably larger than the 3.5-inch screen of the Magician X from Mingda. A bit unusual, but not annoying: The touchscreen of the Vyper is in portrait mode and almost looks like a smartphone. Nevertheless, the menu in the Magician X is very clear. Use the arrow keys on the right side of the screen to scroll up and down the files. Locate the GCODE file you want to print and tap its name. The printer will then begin preheating the print bed and extruder.
In terms of temperature, the Mingda Magician X supports an ambient temperature of 5 to 40 degrees Celsius. The nozzle can be operated at a maximum temperature of 260 degrees. And a maximum temperature of 110 degrees is provided for the hotbed or print bed.
The positioning accuracy of the Magician X is also decent. The manufacturer specifies an accuracy of up to 0.0125 millimeters for the x-axis. The same applies for the x-axis, of course. For the z-axis, on the other hand, it is even only 0.002 millimeters of accuracy. Thermoplastic polyurethane (TPU) is a soft and flexible thermoplastic that is commonly used in 3D printing for prosthetic parts, cell phone cases, and other items that need to be elastic. TPU filament is more difficult to print than PLA or ABS because it has a very low glass transition temperature. In 3D printing, infill is the area inside a printed object that is filled with material. This is usually done to save filament and reduce print time, as less material is needed for the inside of an object than for its outside.For the price point, the Magician X 3D Printer includes many features. Many of which are often only available for prosumer-level 3D printers. 230x230x260mm Printing Area The Mingda Magician X is supplied with power via a three-pin IEC cable. The power supply is thus integrated here and is supplied with the usual mains voltage of 240 volts. Power-outages are the enemy of additive manufacturing, especially with 3D printers. Fortunately, the Magician X 3D Printer includes a feature that will resume printing where the last print was stopped due to a power shortage. Such a feature is not new or unique to 3D printers, but it is typically not included with entry level consumer 3D printers. Automatic Filament Detection In spite of my problems with the user interface, I was able to successfully 3D print plenty of objects in several different materials. It just took a bit of exploration and experimentation to determine what all the touchscreens really meant.
From a glance, the printer appears to have a plastic frame – but don’t be fooled! A series of injection-molded panels enclose the solid steel frame and inner parts. The plastic panels protect the printer and provide it with a simpler look. The electronics are also fully enclosed. In addition, the Extruder and other elements are better protected. This makes it a good candidate for those in a classroom or a shared space, such as a MakerspaceThe default value is always 100%. If you have problems with the extrusion, you should calibrate this value. I recommend you do this anyway if you change the filament every time. How to do this you will learn later in this article.
Great Deal 
New Comment