ELEGOO Neptune 3 Plus 3D Printer

Product Information

With an STM 32-bit silent motherboard, the X/Y/Z/E axes are all driven by high-precision stepper motors to effectively reduce the printing noise under 50 dB. Stable & Quiet Printing】The Z-axis is designed with dual lead screws and dual-motor drive for more stable and precise movement of the print head, and the double tie rod structure enhances the stability of the Z-axis gantry. You can find the correct Cura settings in this article: Neptune 3 Plus | Cura Settings & Profile – Guide & List Print Quality

Auto Bed Leveling + Auxiliary Leveling】Achieve excellent first-layer adhesion and print quality with the 121 (11x11) points auto bed leveling system. Additionally, fine-tune the bed's leveling manually with the hand-twist knobs for optimal alignment and printing conditions. Ease of Use】PEI magnetic platform with a special coating and spring steel sheet for good adhesion and anti-warping, so that prints can be easily released or popped off by bending the print steel sheet.

The Elegoo Neptune 3 Plus ticks all the boxes when it comes to FDM 3D printers.

After that, the print bed only needs to be leveled once manually and then automatically. The manual leveling is done via the paper method at 6 points and in the middle of the print bed. Manual print bed leveling is also supported via the menu. You can tap on the touchscreen where you want to set the z-offset next. When you have set all seven points, the 3D printer automatically starts the automatic leveling. Direct Drive Extruder The dual synchronized lead screws and dual-motor drive make the Z-axis movement more stable and smooth, avoid printing deviation driven by a single Z-axis lead screw motor, and improve printing accuracy and stability. With STM 32-bit motherboard, the X/Y/Z/E axes are all driven by silent drivers to effectively reduce the printing noise to below 50dB. C High-temp Nozzle】With a 300°C high-temp nozzle and an extended hot end, which means the filament can be fully melted and uniformly flow out even at high printing speed, this printer can handle a wide range of materials, including PLA, PETG, ABS, TPU, and high-temperature filaments such as nylon. The Neptune 3 Plus is equipped with a 4.3-inch touch screen for great usability. 8 different languages are supported: Chinese (Simplified), English, Spanish, French, Italian, Russian, German and Japanese.

Intelligent Segmented Heatbed】With 100W+150W power output, the slicing software automatically recognizes the size of the model during slicing and activates the peripheral heating zone if the model size exceeds the center heating zone (120mmx120mm). The two partitions can also be turned on and off manually for more precise temperature control. Additionally, the surface of the PEI magnetic platform is marked for guidance.We then decidedto try something a little more intricate with a few more parts for the final print. Gambody's Klingon Bird of Prey is shown here; it is printed in several pieces, and gears are included to allow the wings to move from the normal to landing position. This print made good use of the build volume because we could fill the bed with parts, and, as with earlier prints, we used the same slicer settings with the exception of a few minor support settings adjustments.