Joined in 2023 
82 
63 About this deal
Select Disable and press the Center ( OK) button to disable the interface. The Disable button of the interface changes to Enable, indicating that the interface is currently disabled. Conflicts can happen this way too. What if the WiF I join happens to use the 192.168.8.0/255.255.255.0 subnet? Just as above, we are now in conflict. If you ever have any doubt about what exact settings to change, once you find them, grab a screen shot and open a support case with LiveU and we will assist you. Change The Third Number To Something Other Than 1, 8 or 10 Her are some example conflicts, with each line in the example below suppose to represent 1 of 2 modems or other connections: 192.168.8.100
Connect two cellular modems with Wi-Fi and LAN and we will bond them together to create a single fat connection for all your needs. OVP/CDN IntegrationDelivery timings are approximate and may differ due to circumstances outside of our control such as flight delays, traffic incidents, extreme weather etc.
While each device is a little different, here are general steps that are applicable to all devices to help guide you. Get To The Settings For Your Device The WiFi client interface shows the selected WiFi network SSID, RSSI signal strength bars and the uplink bandwidth (in Kbps) currently being used. This is step 1 - you will need to access the settings of whatever device you are trying to change: USB modem, MiFi, phone used in tethering, your WiFi router, etc. Combining up to 6 internet connections: 4 external USB modems (5G & 4G), WiFi & Ethernet over LiveU’s industry’s proven LRT™ cellular bonding protocol.Sometimes, the device may only let you set the "third octet", the "1" in this example: 192.168.1.0/255.255.255.0
Your unit may also show some variations of these issues. The exact behavior can differ slightly based on exact modems, and by random factors like the boot sequence of connections - any combination of these behaviors may be a sign of IP Conflict. These are just two examples, if some of the digits in your exact setup differ, it is still a conflict! Conflicts When moving from the Home screen to the Main screen, the Interfaces option is initially selected, as shown above. The selected option is highlighted in gray on the screen.If you have any doubt or unsure, please open a support case and the support team can help identify for sure if the issue is IP conflict. About Subnets and IP Routing For example: Got two brand new modems that are the same make and model each? they will very likely need to be changed to not conflict. The Interfaces option in the Main screen indicates the number of active interfaces out of the total number of interfaces on the LiveU Solo. In the example to the left, 4/4 means that there are four active interfaces out of the four total interfaces on the unit (2 x cellular, 1 x WiFi and 1 x Ethernet network interface).
hours of untethered streaming. Broadcast time can be extended by 4-6 hours per Power X1 External Battery . You frequently get the Communication Error message on your unit - particularly only when using it with modems (vs on only LAN or WiFi)Once a cellular USB dongle (that contains a valid and working data SIM) has been connected to either (or both) these ports, the Solo will automatically dial and connect the dongle, updating the information accordingly. While the unit does have a start button to go live, some services need supplemental services started, such as transcode engines or rendering engines. In these cases, LiveU Solo portal manages thosesupplemental services for you, but can only do so when you start the stream from the Go Live buttoninside the portal. So now you have a short history of how this became a growing issue and why these devices operate this way. Let's, finally, take a look at the actual math of a conflict, as it makes it easier to spot when you know how it mathematically works.
Great Deal 
New Comment