ROO'BAR Cacao Nibs & Almonds - 20 bars (20x 30g) - Raw Superfood Bar (organic, vegan, glutenfree, raw)

Product Information

This requirement is not specifically aimed at bullbars but does effectively prescribe requirements for their construction. ADR 42/00, the first version of this rule, applied to vehicles built from July 1988. Australian Standard AS4876.1-2002 Motor vehicle frontal protection systems Part 1: Road user protection was released in 2002, and applies construction rules to all bullbars manufactured since that date, [15] regardless of the age of the vehicle that they are fitted to. Similar requirements for older vehicles fitted with bullbars manufactured before that Australian Standard was implemented exist only in state legislation.

And with the utility roles the Grenadier 4×4 markets like to have, there is so much potential for customers to modify it to suit their needs that it would broaden the company too much. Instead, this way, the company broadens anyway and everybody wins.” It's fair to say that if you are carrying a load of bikes on the roof there will be wind noise, but a good set of roof bars will minimise it. research from the 4WD Industry Council surveyed 42,600 motorists. Of these individuals, the instance of animal strikes was estimated to be in the region of 25,000 and 30,000 a year. The peak time for these strikes was found to be during poor light conditions. Interestingly, the study found that people travelling in vehicles without roo bars or bull bars were 30 times likelier to suffer an injury than those in a bar-equipped vehicle. Almost ¾ of the drivers surveyed that has been in an animal strike collision felt that if they didn’t have a bull bar of some sort fitted, they would have had the need to swerve and potentially crash into other cars, trees or structures. A push bumper or nudge bar is fitted to the chassis of the car and located to augment the front bumper, to allow the car to be used as a battering ram for simple structures or fences, or to push disabled vehicles off the road.Their excellent manufacturing capabilities and facilities have developed the company’s very strong market place reputation. This reputation is reflected in all ECB company divisions, striving to deliver to our customers the right product, on time, the first time, without any compromise in quality. Bullbar manufacturers in Australia must conform to Australian standard AS47861.1/2002. In some states it may be illegal to drive a vehicle fitted with a bullbar that does not comply with the Australian Design Rules (ADRs). The main ADR requirement that applies to bullbars is a clause within ADR 42/xx (where xx designates a version number), which states (in part) that:

The bullbar – Western Australia-based drivers are very familiar with these pieces of kit. At Irvin Bullbars, these are by far our most popular type of bar work for regional country drivers in particular. A bullbar provides complete, full-frontal protection for your vehicle. So, in the case of a front-of-vehicle impact or an animal strike, you and your passengers can be as safe as possible. The Pursuit Intervention Technique (PIT) bumper attaches to the front frame of a patrol car. It is designed to end vehicle pursuits by spinning the fleeing vehicle with a nudge to the rear quarter panel. Cars not fitted with a PIT Bumper can still attempt a PIT maneuver at risk of increased front-end damage and possible disablement if the maneuver fails and the pursuit continues. Information Sheet: Bull Bars (PDF), London, UK: Department for Transport, May 2010, archived from the original (PDF) on 21 June 2017Put simply, they love what they do. They boldly say they manufacture the ‘World’s Best Alloy Bullbars’ and that is something everyone at ECB believes and lives, they put it on the walls, wear it on their shirts, and put it into the products.