SpinFit CP100-S - Silicone Eartips Replacement for Universal IEM Earphones - 2 Pairs - 4mm Nozzle Diameter (Small)

Product Information

They do balance out even harmonic signatures providing some better contrasting and odd harmonic flavor. However, quite remarkably, the SpinFit tips do not exacerbate sibilance or compressed sounds at the top-end – this is a big strength especially as it able to portray micro-details without enhancing perceived clarity. The mids are clean and uncolored, but I still prefer the mids from the Xenns Top because of its technical abilities, clarity, and control. When compared to the Khan, I prefer the Khan's mids because of the dynamic driver tonalities. Both the Xenns Top and the Simgot EM6L have a balanced armature tone to them. CP360 and CP1025 are designed for TWS earphones. CP360 is designed to provide a deeper fit, while CP1025 is more shallow. While both will fit on most TWS earphones, some charging cases may not be compatible with the CP360. CP1025 is also available with adapters for Apple AirPods Pro and Samsung Galaxy Buds Pro. W1

SpinFit’s double-flange tips offer further levels of sound isolation with an even superior seal compared to the flange tips. Again, they are a good fit for poorly isolating in-ear monitors without compromising on comfort during prolonged listening sessions. CP100+ Ear Tips Spinfit นะครับ เป็นจุกหูฟังที่คุ้มค่าแก่การจับจองเป็นอย่างมากเลยครับ ไม่ว่าจะความนุ่มของตัวจุก และเทคโนโลยีลิขสิทธิ์เฉพาะของ Spinfit ที่แกนจุกสามารถเอียงเข้ากับสรีระหูของเรา ได้ทำให้สวมใส่หูฟังได้สบายและกระชับมากขึ้น อีกทั้งยังทำให้เสียงจากหูฟังส่งตรงถึงแก้วหูได้เต็มที่ ทำให้ได้คุณภาพเสียงเบสและแหลมที่ดีขึ้นอีกด้วย โดยตัวแอดมินเองเป็นคนที่หาจุกหูฟังที่เข้ากับสรีระหูยากคนนึงครับ แต่พอได้มาลองใช้จุก Spinfit ก็ถือว่าตอบโจทย์ได้ดีเลยครับ สวมใส่หูฟังได้กระชับมากขึ้น ไม่รำคาญเลยครับเวลาฟังเพลงนานๆ แถมเสียงดีขึ้นอีกด้วยครับ The peculiarity of the CP100 is that they are tall (9.9 mm), but they are actually quite wider at 13.3 mm. This means that they won’t need to go very deep to seal off your ear canal and therefore will also be fine for earphones with short nozzles. Thanks to this good seal, bass is well extended and controlled, while the rest of the range comes out as well balanced and with no particular colouration and the same sensation of good control as in the lower area. As a whole, the sound is mostly unaltered and this also includes the “bad” side of this, as the tips won’t reduce peaks e.g. in the treble area. It’s not only a matter of comfort: the CP145 prove to be great at passive isolation as well. As they seal off the ear canal quite well, the side effect is also that there is an almost-perfect level of isolation. Although the overall isolation is of course dependent on the earphones as well, these eartips make a real difference and shut most of the noise out. SpinFit CP155 The CP240 is a double flange eartip. Double flange eartips are useful for listeners who have larger ear canals and have a hard time getting a good seal. They can also provide improved isolation in general. On the CP240, the SpinFit pivot comes in between the first and second flange, to provide flexibility at the top for the second flange.With the CP100, the Aurvana Trio’s mid-treble sounds a little harsher, while the midrange is slightly less articulated. I attribute it to a more filling bass and harmonics which somehow influenced the texture of the instruments, making them less clean. Disclaimer: I received the ear tips from SpinFits at no charge in exchange for an honest review of my experience with them. My thoughts and opinion here are all my own.

Among the rest, the CP-360 should be in your stable if you’re into TWS earphones, they are one of the few TWS-specific eartip after all. The CP-500 is a specialist eartip that can be unpredictable, and being the widest-bore tip in Spinfit’s lineup offers something unique. Finally, the CP-240 is something I couldn’t find a use for and the CP-800 didn’t perform as well as the tips it’s supposed to replace (for me). So these two don’t excite me as much. SpinFit’s tips are an excellent addition to an audiophile’s inventory with real sonic improvements, exceptional ergonomics and a transparent delineation of sound. The SpinFit silicone tips especially excel in texturing & resolve of the bass, articulacy of the midrange and a detailed yet restraint treble section. Everything else is the same as on “normal” silicone eartips, which is also why the SpinFit tips are so great: you get all the pros (good isolation, washability and basically eternal durability, wide compatibility) with none of the cons.The SpinFit CP1025 were made to fit the Apple AirPods Pro thanks to an included adapter. The adapter is in fact an add-on that you can ignore completely if you use other earphones, and the CP1025 work just as well. In fact I think SpinFit should market this model not just for AirPods Pro as it – surprisingly – is also the one that I found to work best with other TWS as well, even more than the CP360. Update: SpinFit has actually done so, making the CP1025 available without the adapter and as more general TWS eartips. The CP1025 have an inner diameter of 3.6 mm and an outer diameter of 12 mm, with a height of 6.7 mm. There are four sizes available: L, ML, M and S. Spinfit แตกต่างจากจุกหูฟังทั่วไปยังไง สำหรับข้อดีของจุกหูฟัง Spinfit คือตัวจุกได้รับการออกแบบรูปทรงให้โค้งรับกับรูหูมากขึ้น และใช้เนื้อซิลิโคน Let’s look at the different SpinFit models, and compare how they fit on a selection of IEMs. Note that the sizing within each model (Small, Medium, Large) only affects the width of the flange and how that fits your ear, and does not affect the size of the bore or how well they will fit on different IEMs. CP100/CP100+ Some may find that tips are a shade crisp for their tastes and hence foam tips may be more their flavor. However, trialling and experimenting with different combinations will aid the quest to find the perfect sound.

The SpinFit CP800 were the only ones I could not try due to not having compatible earphones: they are made for super-thin nozzles like those used by Shure, Westone and Etymotic. At just 2 mm wide, the inner bore is too narrow to house earphones with 4 mm nozzles (believe me, I tried). I will update this review as soon as I lay my hands on compatible earphones, but I expect them to behave exactly like all other eartips in this list. SpinFit CP1025 In terms of sound, there’s not much of a difference with the CP145, though highs tend to be a bit more present (probably due to the material being harder and therefore more prone to reflecting higher frequencies).The CP240 has a wide bore and fits comfortably on larger nozzles, but it also comes with a selection of adapters that allow it to fit snugly on smaller nozzles as well. CP360 and CP1025 The basic idea underlying every SpinFit eartip model is the following: traditional eartips have a straight solid core at their centre which stays so independently of the actual shape of the ear, but it would be better if the core could bend and follow the curves of the ear canal. This is what happens with the SpinFit tips: there is a point in which the silicone is thinner and therefore softer and it’s shaped like a doughnut, so that it can bend and provide better comfort. From the perspective of comfort, although they’re nowhere near the level of triple-flange tips, it still takes a bit to get used to them. They’re much longer than the other earphones and therefore get deeper in your ears, which may be a bit unsettling. I found it’s also a matter of inserting them at the right angle, as otherwise they become very uncomfortable and don’t sound good. If you get the insertion right, though, you get a great level of comfort. I find it inferior to the single-flange tips, but great for dual-flange ones. SpinFit CP360