Irwin HILGLM Hilmor Glm Pipe Bender including The Guides & Box Hilglm, 15mm-22mm

Product Information

A. If your pipe is thin walled and your equipment is not clean (Answered by Colin Stainer Plumbing & Heating on 27 Jan 2021) The Monument single sized pipe bender measurements can be seen in the image. 15mm standard version is approximately 460mm and the standard 22mm version is approximately 670mm. Combi Bender 2600K MON2600 The 2600K includes 15mm and 22mm aluminium guides. These guides are available as spares;15mm 2601N and 22mm 2603T. These guides also fit Irwin® and Hilmor® GLM.

Monument have reengineered a design previously unseen on the UK market. The (launched in June 2020 ) pipe benders, 1215K XV 15mm Pipe Bender, the 1315XVE 15mm (1315Longarm XVL 15mm) , the 1222G XXII 22mm and the 1322Extended XXIIE 22mm Pipe Benders deliver force to bend the pipe in the same plane as the bend. The traditional combi bender such as the Hilmor ® GLM or Irwin ® GLM or Monument ® MON2600 are offset from the bending plane. In addition to formers and guides, there are also a range of other spare parts and accessories available for pipe benders. These can include replacement handles, ratchets, and hydraulic cylinders, as well as spare batteries and charging kits for cordless benders. Problem? We’ve creased pipes (and had to junk that section) using cheap pipe benders multiple times.And let’s face it, two separate guides just mean you have two more things to lose, and two more things you’ve got to find in your van every morning.

lighter in the hand than a combi. The Monument combi weighs more than 4kg; the XV weighs 1.5kg; the XXII weighs 2.3kg A. Cheap thin copper but even expensive copper ripples. But makes a big difference with running wire wool over the guides first. Keep them clean. Found the wee monument benders don’t ripple the pipe as much. Great wee benders (Answered by Roy Millar Plumbing and Heating on 26 Jan 2021) If you’re installing a whole run of heating/gas pipe, swapping out the guides is going to turn into a real bug-bear. We believe the 1215K-XV, the 1315XVE, the 1315Longarm-XVL, the 1222G-XXII and the 1322Extended-XXIIE are easier to use than a combi bender:Before you remove the pipe from the Former, view your bend angle; remove the pipe if it is correct, or if necessary, reapply the Lever Arm and increase the bend angle. Frequently Asked Questions FAQs They weigh under 500g, and that’s pretty-lightweight, but they certainly provide more than enough power to get the job done.

Buy the Monument Bender Single Sized – 1215K-XV 1315- XVE (1315Longarm-XVL) 1222G-XXII 1322Extended-XXIIE The image to the right shows that the pipe has been flattened by just under 0.4mm – the basic reason for this is that the formers are not quite correct for 4mm pipe or that there is a tendency for the two sides of the former to move apart during the forming process. I suspect that this is actually due to a combination of these: poor fit and forms coming apart. The 15mm 22mm pipe bender or tube bender is an essential part of the toolkit for any heating or plumbing engineer.

Tooltalk Reviews

A. Over the years been a few reasons, main reason I find or is poor quality copper! Other reason dirt on the guides generally a good clean and oil or dw40 sorts it out, had once with bender that had been dropped and it was slightly twisted (Answered by B H heating solutions on 26 Jan 2021) Rubber feet are available code 2607F which fit the 1215K, 1315XVE, 1315Longarm, 1222G, 1322Extended. Two rubber feet are included in the 22mm versions. The rubber feet also fit the Monument 15mm/22mm combi bender 2600K.