Tapworks Ultra 9 EASYFLOW Metered Compact 524mm High Water Softener + Full Kit

Product Information

The Waste Electrical or Electronic Equipment (WEEE) Directive requires countries to maximise separate collection and environmentally friendly processing of these items. How are we helping? Conventional water softeners range from a few to several hundred pounds. While the cost may make you feel a bit queasy, you’ll feel a whole lot worse if clogged pipes end up with you having to fork out for a new washing machine, dishwasher and boiler.

A water softener is a filtration system that attaches to a household water supply to soften hard water through an ion exchange process.

And last but not least you should pay attention to the dimensions of such system. Highly capacious water softeners usually take up much space. You will notice that there are portable space-saving models. However, they are better suited for car wash than for home use. The Water2Buy W2B200 Water Softener has been engineered to accommodate average households, so while the unit is not necessarily versatile, it will usually prove the right fit for most people. Its flow rate will be able to support up to 4 people simultaneously, which is, again, more residents than the average house/flat holds. The machine will be providing completely limescale-free water, able to generate around 1,250 litres of filtered soft water on a daily basis. The components will last when dealing with both city and well waters. Plus, the unit adopts an efficient digital metre control, allowing the appliance to consume less salt and water without minimising the regeneration amount.

What's arguably more important is that the machine accommodates both 15- and 22-millimetre plumbing, making sure that the appliance is a welcome guest as far as all households are concerned. The company's EasyFit All-in-One integrated by-pass kit will present very little installation challenges and will allow you to set the machine up and running within ~10 minutes tops. Tapworks water softeners are a trade water softener intended for the plumbing trade. Tapworks water softeners utilise components made in the USA by Ecowater Systems. When compared the actual Ecowater branded water softener systems the operational specification is some what similar, YET DIFFERENT.Their water softeners use up to 80% less salt than competing brands making them efficient to run too. Depending on the size of your household, you need to consider the daily capacity as well as the size of the unit itself, particularly if you have a smaller home and kitchen. How do I know which water softener to buy? It is also very efficient as it comes with a genius chip technology that helps save both time and money. Small and compact can be attractive, but sometimes it may a compromise.Occasionally, with a smaller under sized water softener (any make of water softener) you may actually notice less water power (pressure) in your shower, especially if the equipment is cleaning itself or another member of your household is using water somewhere else. Pressure drop across these types of water softeners are just over 1 bar at 30 litres of water per minute. This isequivalent to say amodern shower running, hot and cold kitchen taps running water and perhaps the toilet cistern re-filling. This is suitable for the majority of homes but not all.

The range of Tapworks softeners is listed below. Keep in mind that the higher the number associated with the series, the greater the capacity model (this is usually the case with most models). The Tapworks NSC09PRO Water Softener replaces the Tapworks ULTRA9 and AD09 Water Softeners. The Tapworks NSC9PRO Ideal for smaller spaces, suitable for 1-5 people. For each clean cycle using between 0.25 kg and 0.35 kg per clean, the annual usage is 127.75 kg a year (set at 0.25 kg) or over 178 kg per year (set at 0.35 kg).Tapworks water softeners create softened water by extracting the hard minerals from water using an ion exchange process. Inside the water softener is a vessel of sodium-charged resin beads. When you use water in the home it passes through this vessel and the hardness minerals (calcium and magnesium) are exchanged for a small amount of sodium. They can reduce fuel costs and save on energy by reducing the build-up of scale on heating elements.

The TwinTec water softener says that it the worlds smallest twin cylinder non-electric water softener. This clean cycle water usage for the Kinetico 2020c HF water softener is over 8.7% of the actualannualwater usage.) Now for the salt cost According to Pennsylvania State University, resin is a material that resembles sand and is coated with positively charged sodium ions, with more electrons than protons. The hard water flows through the resin and exchanges its sodium ions (i.e. salt) for calcium and magnesium ions. That’s why a water softener needs salt.

It is not recommended to run regenerating waste water into a pumped waste system such as macerator or float control pump because in the event of a failure of such a device the softener could recharge and flood the area. If our investigation shows that parts or additional labour will be needed, we will quote for these. Then you can choose whether you want us to go any further.