BONTEC Dual Monitor Stand for 13-27 inch Screens, Ergonomic Desks Mount, Height Adjustable Arm Bracket Tilt 90° Swivel 180° Rotate 360°, VESA 75/100 White

Product Information

Long warranty: Monitor arm technology isn’t something that will change radically and warrant a replacement every year or two. Instead, you should expect a monitor arm to last many years and adapt to changes such as a new desk or display. It’s furniture. Because of that, we looked at warranty length and customer support to see which companies would stand behind their models and the arms’ expected years of performance while holding up an expensive monitor (or two). Note that monitor arm warranties don’t include damage to the monitor itself. First, let’s talk weight. The Ergotron HX is rated to hold monitors that weigh up to 42 pounds and screen sizes up to 49 inches. That’s an extraordinarily high weight limit—I haven’t reviewed a single monitor in 2023 that exceeds it. I attached both a 32-inch widescreen and 38-inch ultrawide monitor, which weighed roughly 15 and 20 pounds, respectively, and the HX easily handled both.

The Workstream by Monoprice single monitor arm is a no-frills solution that delivers basic monitor arm features at an exceptionally low price. The Workstream’s slim budget is felt in its difficult setup and stiff operation. Users will need to install several screws for a clamp or gromet mount. More screws may need to be adjusted once the arm is in place, as its default tension proved inadequate for supporting a 32-inch monitor.Additionally, some of the two monitor models have specific restrictions in regards to how wide the arms can go. This means that certain sizes of monitors, such as ultrawide monitors, might not be compatible with the dual arm models. Be sure to confirm that your monitors will fit on the arms even if they don’t exceed the weight limit. Ideal Ergonomics There’s one unusual feature: a USB hub. This includes two USB ports that are placed at the front of the arm base. Each of these will need to plug in to your computer, which might be a problem if you have a laptop with just a few ports, but it’s a functional bonus.

The monitors range of adjustment is a bit limited compared to the LX. It offers 11.5 inches of height, 75 degrees of tilt, 180 degrees of swivel, and 360 degrees of rotation. However, a somewhat more limited height adjustment is typical in this category due to the size of monitors these stands are expected to carry. Each monitor arm is almost all metal with only a small piece of plastic to provide cable routing. The arm also has gas springs capable of lifting up to 26 pounds of weight, which is enough to handle 32-inch widescreen and 34-inch ultrawide monitors. Many monitor arms now have some form of cable management. This can either be in the form of a small clip on the arm itself to hide the cables from view, or more advanced internal systems which completely hide them from view. One of the most appealing benefits of having a monitor arm is how much it cleans up the look of your setup, so we’d highly recommend considering some of the more advanced cable management monitor arms out there. Price The Huanuo HNDS12, like the HNDS6 (below), is a bit fiddly to set up. It has two clamps that need to be adjusted and roughly a dozen screws that need to be installed. The gas springs also require a bit of adjustment to reduce the force provide, at least when used with a 24-inch or 27-inch monitor.Smoothness of motion: We preferred monitor arms that were firm enough to stay put while we worked but could reposition easily and didn’t require too much force. Monoprice lists the monitor as capable of supporting 20 pounds, but I felt the 32-inch monitor (which weighed 15 pounds) was pushing the Workstream to its limits. Monoprice also skimps on the warranty, offering just one year of coverage.