Bedec - Barn Paint - Anthracite - Satin - 5 litres

Product Information

The advantage over conventional systems is that the coats applied are all Barn Paint, therefore no stress is built up within the coating layers. Carry out any structural repairs prior to application. The substrate must be sound, dry and free from oil and grease: Guttering, barns, outbuildings, drainpipes, windows, water silos, posts, galvanised steel, horse stables, farm equipment, tanks, doors, garden sheds, cladded industrial & factory units, corrugated metal and metal box cladding. Make sure any surface to be painted is clean, dry and free any possible contaminants such as dirt or grease. Remove any loose paint, as well as any mould and fungal growths. See the attached data sheet for specific advice on how to prepare various surfaces. Application

All-Weather Performance: With Bedec Barn Paint, you can trust in its exceptional all-weather performance. It is specifically formulated to withstand extreme temperature fluctuations, UV exposure, rain, snow, and other environmental challenges. This ensures that your barn remains protected and visually appealing throughout the seasons. New planed, finished wood or PSE wood should also be abraded to open the grain and allow maximum penetration Ease of application is another key feature of Bedec Barn Paint. With its smooth and creamy consistency, the paint glides effortlessly onto surfaces, ensuring a seamless and professional finish. Even if you're not an experienced painter, our paint makes it easy for you to achieve remarkable results. Plastic, metal, timber and smooth surfaces should be rubbed down with abrasive paper or equivalent.AK0002, AK0003, AK0083, AK0095, AK1200, AK1296, AK1487, AK1873, AK1880, AK2007, AK2008, AK2009, AK2010, AK2011, AK2013, AK2014, AK2015, AKB001, AKE004, AKH003, AN0002, AN0003, AV0002, AV0003

It is highly recommended to coat, fencing, gates, farm equipment, tanks, drainpipes, doors, windows and many other areas around gardens, farms and factories. Bedec Barn Paint can be applied to previously painted surfaces, even those coated with weathered bitumen, tar varnish or creosote, as long as there are no loose powdery deposits.NOTE: Mahogany, Jacobean Walnut, Medium Oak and Dark Oak are semi-transparent, semi-gloss wood stains that stain the wood, rather than paint it a solid colour. Area Lightly abrade all surfaces to remove any grey, weathered wood and surface sheen from remaining coatings, and to open up the grain on new wood