Makita HS0600/2 240V 270mm Circular Saw

Product Information

Ridgid has several products in its table saw category, and all of them use a 10″ (254mm) blade. But while the blades are equal, there are slight variations in the possible cut depths across products. the tool is not an Air Compressor/ Air Tool, a Battery/ Charger, an Accessory, or a Petrol or Production Tool

There’s no doubting the quality of the Makita, which goes a long way to explain the brand’s popularity among tradespeople. With the exception of the handle and motor shroud, pretty much everything here is made from metal and it feels like it could withstand an atomic blast, let alone a drop from a workbench. Additionally, the number of teeth on the blade can influence the cutting depth, with blades having fewer teeth generally cutting deeper. While one of these table saws has a 2″ (50mm) larger blade, they both have similar maximum depths of cut and would equally suit anyone looking for a table saw 100mm (3.9”) cut depth, sure, the saw with the larger blade might perform better in some other ways, but as far as the cut depth is concerned, a larger blade doesn’t always mean better. Final ThoughtsWe’ve tested the three main types of saws here – corded, cordless, and a mini circular saw – covering all-round useability, the accessories included, the noise when the saw is spinning freely and during a cut, and, of course, its ability to cut wood. In contrast with the 7 ¼” blades, the 10 ¼” has a most extreme cut depth of 3 13/16″ while the 12″ blade can cut to 4″. Follow Through: After the cut is complete, keep the saw moving along the cut line until the blade has fully stopped. This will depend on what you’re planning to cut and how you’ll be using the circular saw. Larger blades will cut more deeply, but they can also be unwieldy. Not all blades will fit on all saws, but you can swap between blades depending on what you’re cutting.

Furthermore, the quality of the materials used and the manufacturing techniques employed can affect the performance and longevity of the blade, ultimately affecting the cutting depth. This adjustment feature allows you to precision- and control-over the saw’s performance, achieving accurate and consistent cuts. A 6 1/2″ circular saw blade can cut 1 1/2″ of depth when the saw blade is a 45-degree inclination. It can cut a maximum of 2 1/8″ of depth when the saw blade is 90 degrees. Saw Blade Angle The same is true in case of a table saw, miter saw, and other similar power tools. 7 ¼″ Saw: How Deep Can a 7 ¼ Inch Circular Saw Cut? The main things you should be looking out for when choosing a circular saw are cutting capacity, cutting depth and bevels. The capacity and depth of your cut with a circular saw is based on the size of the saw’s blade. In the case of our cordless circular saws, the blade is a standard 165mm.Maintain Control: Keep a firm grip on the saw with both hands and use steady, controlled movements to guide the saw through the material. The depth of cut achievable from your cordless circular saw varies from manufacturer to manufacturer, so look out for the maximum cutting depth at 0°. That’s how deep you’ll be able to cut when the saw isn’t being used to cut a bevel, which is achievable if the saw has an adjustable base plate. The motor on a circular saw is liable to be placed under extreme stress if you’re cutting long pieces of hard timber. So look out for safety features built into the motor, such as protection against burning the motor out, fans to keep the motor cool or advanced braking systems that immediately kill the motor and stop the blade in an emergency. Circular Saw Blade Cutting Depth for 0 – 90 Degree How Much Depth Can a 5 1/2″ Circular Saw Blade Cut?