Joined in 2023 
82 
63 About this deal
The Xpelair C4HTS is a terrific extractor fan choice, coming in at 20 dB. Advertised at 16 dB we believe it’s closer to 20 dB, which is still the quietest we’ve tested. Yes, it is highly recommended to get a bathroom fan with a humidity sensor. This type of fan can detect the level of humidity in the bathroom and automatically turn on and off accordingly. This is important because high humidity levels can cause mould and mildew growth, which can be harmful to your health and damage your bathroom. A bathroom fan with a humidity sensor can also help reduce moisture buildup, prevent condensation on mirrors and walls, and improve air quality. In addition, this type of fan is convenient and energy-efficient, as it only runs when needed. Overall, investing in a bathroom fan with a humidity sensor is a smart choice for maintaining a healthy and comfortable bathroom environment.
An overrun timer gives it time to complete the job. You can set how long it runs for when the fan is installed, but most models offer settings from 30 seconds to 30 minutes. If you’re going to use this feature, it makes sense to leave it running for as long as possible to make sure it removes as much humidity as possible. The Xpelair offers two speeds depending on how powerful you’d like it to be. This will vary on bathrooms size, and will have an effect on noise level. The slower the fan needs to work, the quieter it will be. The timer can range from 30 seconds – 30 minutes, again this setting will depend on how hard you need the fan to work.
Blow off some steam, banish damp and wave goodbye to condensation with our favourite bathroom extractor fans for every budget
Most domestic bathroom extractors attach to a 100mm hole in the outside wall. If you’re replacing a standard-sized extractor fan, this hole will already be present and you should be able to install the new one yourself. Before you remove the old fan, it’s a good idea to take a photo of its wiring for later reference – and make absolutely sure you shut off the mains power before you take the old one’s front housing off.
If you don’t already have a fan, you’ll need to get in a qualified builder to make the hole and install the wiring. Be aware that there are regulations governing where your fan can be located: if you want to put a fan in Zone 1 (the area within a shower or 2.25m above a bath) or Zone 2 (60cm from Zone 1), it must be a low-voltage SELV fan with a transformer, or an AC-powered model that’s IPX5-certified. Most of our recommendations below are intended for use outside of Zone 2, but the layout of your bathroom may dictate your options.
The best bathroom extractor fans you can buy in 2023
The Envirovent SIL100T is probably the best overall extractor fan choice for a standard bathroom. Coming in white only, it should suit most bathrooms, but leaves it slightly limited when dealing with bathrooms of different colours. The PureAir Sense comes with two spigots (or sleeves): one for standard 100mm installation and another for larger 125mm portals. The larger spigot is the one to fit if you want to benefit from its excellent 39l per second flow rate. That said, its standard 32l per second flow rate is still better than most and easily good enough for the majority of bathroom installations. This could be a good combo with the overrun timer; if there’s still a lot of moisture, even after the overrun, the humidity sensor will activate and complete the job. Do be aware, though, that the sensor won’t work as well if it’s dirty. Wipe it down every couple of months to ensure it works as intended.
A humidistat is a device that measures the level of humidity in the air. When it is installed on an extractor fan, it helps to regulate the amount of moisture in a room or space by automatically turning the fan on or off depending on the humidity level. When the humidity is high, the humidistat will activate the fan to remove excess moisture from the air, which can help prevent mould and mildew growth, reduce odours, and improve indoor air quality. The humidistat also helps to save energy by only running the fan when it is needed, rather than constantly running it at full speed. Overall, the addition of a humidistat to an extractor fan can help to create a more comfortable and healthy living environment. Should I get a bathroom fan with a humidity sensor? Although we’re looking at silent extractors, it doesn’t change the fact that many of the features will be the same for any extractor. The precise duration of the overrun is normally configured during installation, with most fans offering a range between 30 seconds and 30 minutes. You might as well tend towards the latter end of the scale as the cost is very low: on average, a fan like this uses around 8W. This model comes in four variations, each with different extras like a Timer, Pull Cord and Humidistat. The variation with a Timer and Humidistat is the most expensive option, but one well worth looking into.This is the cheapest fan we’ve tested, and it holds up well against the competition. Granted, it has less features than others (no timer or PIR) so if those are essential then this isn’t the fan for you. Recorded at 26 dB, it’s on par with the Envirovent and louder than the Awenta, although the Awenta offers extraction of less litres per second. So, if you have a bigger bathroom or condensation is a problem, it might be better you go for a slightly louder model that has more power. Your bathroom is on the inside of the building and so has no windows at all. This is more common in flats
Depending on the schedule of other members of the household, it could also wake you up. If you have a spouse or flat mate that works late shifts and likes to shower when they get in at night, then a noisy fan running at all hours could disturb your sleep. The unobtrusive Arezzo silent bathroom extractor fan uses the latest technology to deliver you optimal performance, comes with decorative silver front panel. Suitable for a wide variety of fittings such as walls, ceilings and panels.
You may also need
Even if your fan doesn’t wake anyone, it might simply be an annoying sound. If you’re unwinding in the bath after a long day, the last thing you want is the drone of the extractor fan running.
Great Deal 
New Comment