Autoglym Polar Blaster Snow Foam Lance, Car Wash Foam Gun For Pressure Washer Application

Foam and which Fitting? Screwfix Titan Pressure Washer - Foam and which Fitting?

Once the Polar product has fed through at the desired level, begin applying to your car in accordance with the relevant Polar Series product instructions. Polar Seal is a very protective coating that has been specially formulated for application through a pressure washer with a foam gun. It imparts a hydrophobic layer onto paintwork that causes water to bead on the surface which reduces the time it takes to dry the vehicle. Simply spray onto a clean, wet surface, rinse off and dry to leave behind a durable, high gloss finish. Features & Benefits: The Autoglym Polar Kit contains 3 products used via a pressure washer to maintain & protect your vehicle. Screw the Foam Gun Head (B) onto the Polar reservoir bottle (D) and attach the Polar Blaster to your pressure washer lance. Use the maximum foam setting when using the Polar products. However, it is possible to rinse the Polar Blaster through between uses by turning the foaming adjustment off.auto-foam is a new generation premium quality, foaming water-based pre wash treatment, designed to soak and saturate soiled vehicle paintwork prior to the application of vehicle shampoo and paint food. auto-foam is gentle too and is for use with all pressure washer foam lances We test the affordable GearWrench 72-point Ratcheting wrench set to the test to see whether it can compete with it's more expensive rivals. If your vehicle only has very light soiling and you are using in place of shampoo. Please rinse vehicle first before applying Polar Blast. You can either allow to dwell and rinse without agitation or agitate with a sponge or wash mitt prior to rinsing. We recommend starting with a snow foam like Polar Blast to gently loosen dirt, and follow with Polar Wash to remove any dirt or contamination on your paintwork. Uneconomical compared to rivals. Have to use 200ml in the average snow foam lance compared to most commonly 100ml of rivals.

Autoglym | Polar Blaster Adapter for Nilfisk Pro Autoglym | Polar Blaster Adapter for Nilfisk Pro

Leave Polar Blast time to dwell and loosen dirt for up to 10 minutes, although do not allow it to dry on. Polar Wash is a safe and effective cleaner applied after using Polar Blast to remove excess dirt, traffic film and grime from your paintwork. This reduces the risk of scratches and swirl marks caused by a sponge or wash mitt moving over heavy contamination.

Thirdly the Nozzle that adjusts the Spray Pattern has a very limited range too compared to my other Snow Foam Lance. Have you tried your previous foam with the AG Lance and gave you tried AG foam in your previous Lance ? The way you've written it, suggests a new Lance and new foam which you are comparing to a different Lance and different foam.