Loctite 638 Very High Strength Retaining Compound - Metal Adhesive Retainer Glue: 10ml Bottle

Product Information

It is recommended to use LOCTITE 7063 to degrease and clean surfaces prior to applying the adhesive Hydroxyethyl Methacrylate, Acrylic Acid, Cumene Hydroperoxide, Dimethacrylate Ester, Hydroxyalkyl Methacrylate, Methacrylate Monomer, Methacrylic Acid, Polyglycol Dimethacrylate, Polyurethane Methacrylate Resin Fluorescent, Résistance : Résistance élevée, Résistant aux températures, Tolérant aux traces d’huile, Viscosité Viscosité élevée Allow LOCTITE® 638 to develop full strength before subjecting to any service loads. This will usually take about 24 hours.

For shrink fitted assemblies. Apply adhesive onto the pin. Heat collar to create sufficient clearance for free assembly. Hold together or clamp bonds until the adhesive has fixtured.

Festigkeit: Hohe Festigkeit, Fluoreszierend, Temperaturbeständig, Viskosität: Hohe Viskosität, Öltolerant Alta resistenza su qualsiasi metallo, compresi i materiali passivi (ad esempio acciaio inossidabile) Fixation cylindrique, Pour assemblages en jeu libre, Pour la fixation étroite de pièces cylindriques

Cilindrische bevestiging, Voor delen met glijdende passing, Voor nauwaansluitende cilindrische onderdelen LOCTITE 638 is a high strength retaining compound. It is designed for the bonding of cylindrical fitting parts. The product is especially suited for use on narrow bond gaps, approaching 0.25 mm. It cures at room temperature when confined between close-fitting metal surfaces. The curing process occurs in the absence of air. Apto para Superficies Ligeramente Aceitadas, Fluorescente, Resistencia: Alta Resistencia, Resistente a la Temperatura, Viscosidad: Alta Viscosidad Fluorescent, Oil Tolerant, Strength: High Strength, Temperature Resistant, Viscosity: High Viscosity

Approbation DVGW (EN 751-1) : NG-5146AR0619, Approbation WRAS (BS 6920) : 0511518, NSF P1 Reg No: 123010 LOCTITE 638 is designed for the bonding of cylindrical fitting parts, particularly where bond gaps can approach 0.25 mm. Ideal for use where high dynamic forces or cyclic loading is expected, for eg: shafts, gears, pulleys and cylindrical parts that For slip fitted assemblies. Apply adhesive around the leading edge of the pin and the inside of the collar. Use a rotating motion during assembly to ensure good coverage. Para Piezas Montadas por Deslizamiento, Para cerrar las piezas cilíndricas de la conexión, Retenedor