Nerf Elite 2.0 Motoblitz CS-10 Blaster, Motorised 10-Dart Blasting, Airblitz 6 Darts At Once, Clip, 22 Elite Darts, Multicolor, One Size

Product Information

Expandable blaster: thanks to a removable shoulder rest, a removable barrel extension and 4 tactical rail inserts, the blaster can be individually adjusted for each battle Ich hatte diese anfangs teilweise auch, musste aber feststellen, dass die Probleme nicht an der Gun liegen sondern an der Bedienung. Vielleicht hilft meine Erfahrung ja auch anderen. On the left side of the shell, four posts also need to be trimmed flush to the shell: Two in the grip and two in the flywheel area. Whenever you're cutting posts, pegs, or fins off of shells like this, you want to be careful you don't go too far. In the case of the top flywheel post, there’s an embossed detail on the other side that we don't want to cut. They don't have to be perfectly flush but keep it as clean as possible. Alpha Trooper CS-18 • Deploy CS-6 • Longshot CS-6 • LongStrike CS-6 • Raider Rapid Fire CS-35 • Rayven CS-18 • Recon CS-6 • Stampede ECS

While you’re here, you can improve the trigger feel by adding some lubricant like the Slug Slime we carry. Depending on where you play, this may attract more dirt than you’d like, so consider this completely optional as well. And that's the Elite 2.0 Motoblitz mod guide. I really love this blaster. I might do a few other mods, including cutting it down to more of a CQB blaster, painting it, and maybe cramming an XBZ into the scope for a different blitz style. But for right now, this is a fun little flywheeler, and I can’t wait to bring this to a game.There’s an existing L-shaped wall in the shell we can use for aligning the switch for our rev trigger. Trim out the excess webbing surrounding that wall just enough for the switch to sit at the midpoint between the two shells. See the picture below for what needs to be cut away. BLASTER MODES: Choose your mode Blast 6 darts at once with air pressurized airblitz action, or unleash 10 Nerf darts in a row with motorized blasting. Includes integrated scope There *is* a “scope” molded into the blaster. However, unless you’re a small child, it’s useless. That being said, one of the blasters’ tactical rails resides on top of it (the other two are on either side of the barrel). Even if you can’t use the default scope for aiming due to being older (I know, what a horrible thought), it’s quite easy to use the rail itself or an attachment to aim for targets at a distance. Duo DS-2 • Eaglepoint RD-8 • Motoblitz CS-10 • Operator DB-2 • Prospect QS-4 • Ranger PD-5 • Spectre REV-5 • Tetrad QS-4 AIRBLITZ ACTION: Blast with air-pressurized power to unleash 6 darts at once. Pump handle to air-pressurize the Nerf foam dart blaster and press the airblitz button to launch a 6-dart storm

WARNING: Do not aim at eyes or face. Use of eyewear recommended for players and people within range. Use only official Nerf darts. Other darts may not meet safety standards. Do not modify darts or blaster. The bottom blaster is the first proper Nerf air-powered blaster to be released since the Mediator Barrel in 2018. AIRBLITZ ACTION: Blast with air-pressurized power to unleash 6 darts at once! Pump handle to air-pressurize the Nerf foam dart blaster and press the airblitz button to launch a 6-dart storm

This change of mind return policy is in addition to, and does not affect your rights under the Australian Consumer Law including any rights you may have in respect of faulty items. Eyewear recommended (not included). Accessories sold separately, subject to availability. Requires 4x 1.5v AA alkaline batteries (not included).

AIRBLITZ ACTION: Blast with air-pressurized power to unleash 6 darts at once! Pump the handle to air-pressurize the blaster and press the airblitz button to launch a 6-dart storm The scope is not easy to look through, as it is too low for the user to look through while shouldering the blaster comfortably. WAYS TO BLAST DARTS WITH NERF ELITE 2.0 MOTORBLITZ BLASTER: Choose your mode! Blast 6 darts at once with air pressurized airblitz action, or unleash 10 darts in a row with fully motorized blasting Solder the positive and negative wires according to the diagram on the cage and route the wires through the wire traps on the cage and the shell. The negative wire will go from there to the XT-60 connector. Take the positive lead down the grip and solder to the second (normally open) terminal of the rev switch. Using the rest of the positive wire, solder to the third (common) terminal on the switch. If you want to use heat shrink on your terminals, you can. But I don't see the purpose as long as your soldering is reasonably clean here.

INTEGRATED SCOPE: The Motoblitz blaster has an integrated scope to help with targeting. Blaster requires 4x 1.5v AA alkaline batteries (not included) What’s this guy doing, not reviewing blasters? Well, he’s busy modding, modeling, and doing general community service! Use a heat gun or the side of your soldering iron to shrink the heat shrink onto the wires. Stretch the large bit of heat shrink and also shrink that over the connector to provide further protection and strain relief. The Motoblitz is a two-in-one blaster similar to the Demolisher 2-In-1. The top part is a semi-automatic clip-fed bullpup blaster, while the bottom part is an air-powered, multi-fire blaster, similar to older air system blasters. It also features an integrated scope and three tactical rails: one on top of the scope and one on each side of the blaster. The jam door is on the left side. I have one of my own and they're lots of fun, and pretty accurate. The scope is mostly for show and isn't practical to use (at least for a big kid) but you could add one to the tactical rail on the top.

don't buy, after purchasing this type of nerf gun as it will jam straight away. for a child that is 10 and 8 years, the trigger and the release will be hard to perform. Includes 24 Nerf darts: the blaster comes with 24 Nerf darts to fully load the 10-dart clip magazine and have 14 more darts available for reloadingMOTORIZED BLASTING: Launch 10 darts in a row with fully motorized blasting! Power up the motor with the acceleration button and pull the trigger to blast each dart I am really excited about this blaster. The Nerf Elite 2.0 Motoblitz is one of the better releases from Hasbro in a long time, combining a Rayven with a master-keyed Hornet-like air blaster up front. That being said, some simple mods can take this flywheeler to the next level. I did note that our 6-round mags from another blaster would not work with it--this is because there's a little plastic notch cut out on those mags (akin to the old read-only tab you'd break off of a VHS cassette--yes, I'm that old) and they don't engage the trigger-enable lever up inside the blaster's magazine slot. Those mags can be modified to work by glueing some plastic or cardboard (perhaps a chopped bit of old credit card) into the notch on the upper rear of the mag. See picture.