Replacement Game Console Base Fixing Screw Stainless Steel Vertical Stand Bottom Screw for PLAYSTATION 5

Product Information

Made from a high-quality ABS plastic, this stand is only meant for vertically-oriented consoles. Simply put, because there’s no claw, it won’t work in a horizontal position. However, it works universally well with both the disc and digital versions of the PS5. Note That The Interface Sizes Of Ps5 CFI-1115A CFI-1015A Disc Drive And Ps5 CFI-1215A Disc Drive Are Different.Please Compare The Type Of Your Optical Drive Interface,

To remove the screw cap, I found a tiny flathead screwdriver was the way to go. You could probably also use a paperclip or a bobby pin too. Image: Kotaku Australia The egamephone online store provides the latest and cheap PS5 Repair& Replacement Parts. replacement ps5 shell, stand, fan, ssd, side panels ，CPU x86-64-AMD /GPU AMD Radeon RDNA 2 System Memory GDDR6 16GB SSD 825GB Optical Drive Ultra HD Blu-ray (66G/100G) You'll also want to ensure that the hooks attached to the stand are lined up correctly with the elevated piece in the middle, as demonstrated below:The screw might be rather hard to remove, but, if you keep at it, then you'll be able to free it. How to stand the PS5 in a vertical position Finally, you'll want to tighten the screw using, ideally, a coin - we used a 10 pence - or something similar. Once the screw has been tightened, you can stand the PS5 vertically and start playing! How to stand the PS5 in a horizontal position If Your Playstation 5 Ultra HD Optical Drive Laser Cable is Damaged, This Could Fix Your Drive Issuee Here's a breakdown of how you'll be able to easily place the PS5 in an orientation that suits your personal taste and size requirements. How to flip the PS5 console from vertical to horizontal 1. Remove the screw

The stand lies right under the PS5 when it’s laying horizontally, with two little plastic hooks in the rear of the machine. The PS5 is kept steady using just friction and the weight of the device, thanks to these hooks and an elevated piece of the PS5 stand in the centre.Gamer Network Limited, Gateway House, 28 The Quadrant, Richmond, Surrey, TW9 1DN, United Kingdom, registered under company number 03882481. Sony built a special compartment for just this purpose into the underside of the stand. When you’re not using the screw, you can just snap it in there. Sony even thought of the fact that in the horizontal orientation, the screw hole would be visible on the left side of the PS5. So the chamber also holds a piece of plastic that you can use to plug the screw hole (which makes it even harder to notice the already inconspicuous hole). You can mount the PS5 in two ways: either vertically or horizontally, which comes as no surprise. But what might catch some off guard is that the process for mounting the PS5 is a bit different depending on the direction you choose. Just note that because of the size of the unit — the whole thing is just under 7kg — it’s not particularly hard to move the PS5 around in this configuration. Obviously no reasonable person would be pushing their PS5 around deliberately, but if you have cats, dogs or small children, then you’ll definitely want to consider laying the PS5 down where at all possible.

Next, you need to place the PS5 with the rear facing upwards and the PS5 logo on it's left wing facing towards you. Once you give it a few turns by hand, use a flat screwdriver or coin to continue turning the screw until it’s firmly in place. That’s it! Now the PS5 can be placed upright, vertically.Straight from the box, the PS5 can be oriented vertically or horizontally. Sony includes a small metal screw that allows you remove and fit the included stand in either position. Whether you want to stand the console upright next to your TV or on a shelf, on its side, it’s very easy to do both. Using a dedicated horizontal PS5 stand is a great way to add stability and airflow when you have your console sideways. These aftermarket stands utilize two pieces for resting the PS5 on its side while simultaneously propping up the console. Not only does it improve the look, it adds much more stability than the standard base provides. In addition, it allows for better ventilation and heat dissipation. Before you start attaching the stand, you'll want to rotate the stand's hook so it's north-west of the elevated section of the stand. See the picture below for a better idea of what position the hook should be in:

For the vertical mount to work, you need to screw the base in. There’s no hooks on the bottom to give the base stability. But there’s a catch: you’ll have to remove the screw cap from the left side of the console. It’s the side where the power button is, or the power/eject/Blu-Ray drive if that’s a bit easier. Repair Disc Loading Issues On Your PS4 Ps5 Such As “Unrecognised Disc” With New Detection Switches. If you have the space, then you'll most likely want to have the PS5 standing in a vertical position. While you can do this without the stand, it will help keep your PS5 safe, so we highly recommend using it. When the PS5 is resting horizontally, the disc slot should be on the bottom (if it’s on top, your machine is upside down). The hole cap was designed and modeled by me to be a perfect fit into the tiny hole on the PS5. I sent off a few test variations to be 3D printed to make sure the best design was chosen for you. These are made in the USA right in American Falls, Idaho.Rather than using and/or relying on the OEM PS5 stand that’s included with your console, there are several other ways to orientate your console. To do so, you'll need to attach the PS5 stand to the console in one of two different ways to ensure that your console is as safe as possible. So now that the cap is removed, you can actually go about attaching the base to the PS5. But therein lies another problem: this requires a screw, and as you might have noticed, there’s not one in the box. egamephone ay mabuti. Maaari kaming palaging magbigay sa amin ng mga materyales na kinakailangan para sa pag-aayos ng ps3, kung ito ay ang motherboard o ang mga turnilyo, sila ay palaging masigasig. ..."