HIDEit Switch Mount - Wall Mount Nintendo Switch Dock (Black)

Product Information

front panel facing down or to the side, to allow sufficient airflow and to provide easier access to the cables. The documentation set for this product strives to use bias-free language. For the purposes of this documentation set, bias-free is defined as language that does not imply discrimination based on age, disability, gender, racial identity, ethnic identity, sexual orientation, socioeconomic status, and intersectionality. Exceptions may be present in the documentation due to language that is hardcoded in the user interfaces of the product software, language used based on RFP documentation, or language that is used by a referenced third-party product. Learn more about how Cisco is using Inclusive Language. Secure the switch to the desk mount using the two 10-32 Phillips pan-head screws provided. Figure 10. Mounting the Switch Under a Desk or Shelf A. Unfortunately, there aren’t many Switch wall mounts on the market, and the ones that exist require hardware and some drilling. If you’re concerned about damaging your wall, ask an expert to do it for you. They know how to install the mount with minimal damage to your wall. An expert can also get it level the first time and so avoid drilling multiple unnecessary holes. Slide the retainer clamp around the AC power cord and position it closest to the connector on the adapter.

As far as installing the mount, it’s easy enough for the average person to handle, though there’s no shame in passing it off to a pro. To install successfully, the mount requires some measuring and leveling, as well as correct placement on the wall. If you go by trial and error, your wall could end up with a number of unnecessary holes. Features Materials The cable guard prevents tampering with the cables after they are installed. The cable guard (C9K-CMPCT-CBLE-GRD=) is notCubic Charge Nintendo Switch Stand | Paintable Model | Gaming Decor Office Desktop | Switch Stand | Gift for Gamer Use a wire-stripping tool to remove approximately 0.5 inch (12.7 mm) ± 0.02 inch (0.5 mm) of the covering from the end of Determine your permanent furniture arrangement before installing the mount. If you decide to change it, you’ll probably need to move the mount as well.

You can use the mounting tray to secure the switch on to a desk or a wall. The illustrations in this procedure shows how toDo not install the switch with its front panel facing up. Following safety regulations, install the switch with its front Do not wall-mount the switch with its front panel facing up. Following safety regulations, wall-mount the switch with its The switch 10/100/1000 port configuration changes to operate at the speed of the attached device. If the attached ports do Tidy up your gaming station. Since you’re tidying up and mounting your Switch, it’s a good opportunity to declutter your entire gaming area as well.