Joined in 2023 
82 
63 About this deal
On the router, go to [WAN] > [General Setup] and select the WAN interface that the Vigor 130 modem is connected to. In this example, WAN2 is used on a Vigor 2866 router: When the DSL LED is lit solidly, the Vigor 130 has established the link to the DSL line and can be used for bridging.
G.fast / ADSL / VDSL Modem - DrayTek
CO ITU Version[0]: Vendor code of the exchange / cabinet equipment CO ITU Version[1]: Vendor code of the exchange / cabinet equipment (continued)To me, the main heading "ATU-R Info (hw: annex A, f/w: annex A/B/C)" needs to be removed and the column headers, "Near End"&"Far End" should be changed to read "US"&"DS", respectively. By providing a PPPoE bridge, the connected device (firewall, router or PC) can log into the Internet (your ISP) directly and have full control over the Internet connection - that makes the Vigor 130 a unique product. You can connect any device to the Vigor 130 which has a PPPoE client facility, which includes PCs, most Ethernet-WAN routers and the Apple Airport/Time Capsule™ products.
Vigor 130 - DrayTek Vigor 130 - DrayTek
Leave the Service Name field blank if that option is present because that should not be set when using this connection type: Now go to [Internet Access] > [MPoA / Static or Dynamic IP] and enable the MPoA (RFC1483/2684) interface. I imagine it might be possible via more advanced configuration somehow, can settle with just setting it on the actual device when I need to for the moment. In any problem state, it's usually best to use a wired (RJ45/Ethernet) connection rather than wireless. If you cannot access the web interface of your Vigor router, here are some possible causes:I tried changing the SNR value (-50) like someone had mentioned on Ubiquiti forums but made no difference, it always reports the value at around 8 (unless I'm reading the adsl status report wrong). Interesting that you have a HH5A as that is a Lantiq chipset like the 130 but you don't experience any issues with it. If you use DrayTek's ACS-SI management platform, you can use that to roll out the new firmware to all products en-masse. I had the same problem, identical down to the 73999 sync speed, except, the cab I'm connected to is a Huawei.
Vigor 130 Setup with DrayTek routers Vigor 130 Setup with DrayTek routers
The modem will ask you to log in using the same credentials as the web interface. Once logged in, set up the static route on the modem by issuing the command: ip route add 192.168.1.0 255.255.255.0 192.168.2.2 static Enabling Smart Queues in USG reduced buffer bloat to around 1ms, so no need for anything extra hopefully. Vigor 130 modems provide BT Superfast Fibre and ADSL2+ capability and feature one LAN port. This is the standard modem design.Despite the documentation from Draytek to the contrary, the values in the "Near End" column of the detailed stats appear to be consistent with the upstream, and the "Far End" column with the downstream.
Vigor130 | DrayTek
NFEC This parameter reports the actual Reed-Solomon codeword size in bytes used in the latency path in which the bearer channel is transported. Whats the recommend modem/router with bridge mode, something likeZyxel VMG1312? i don't need any wireless features. Provides Annex A modem code 572d07 & 570e01, and Annex B modem code 565607 & 567002.Recommended for Netherlands. (G.Vectoring) 3.9.8.4-07vDS Attainable Rate: The maximum physical rate achievable US Attainable Rate: The maximum physical rate achievable We have upgraded the system architecture for MyVigor server, and now require your help to complete the upgrade process. Notice the heading, "ATU-R Info (hw: annex A, f/w: annex A/B/C)", is explicitly stating "ATU-R" i.e. the local modem/router. Under that main heading there are two column headings, "Near End" and "Far End". Logically, something has to be incorrect about what is displayed. Provides Annex A modem code 567517 & 562301, and Annex B modem code 567617 & 567212. Recommended for Germany. (G.Vectoring) 3.9.8.4-08v For whatever reason, it looks like the DLM has applied a banded profile capping the downstream speed at 74Mb. So nothing you can do will immediately restore the speed, but if you remove the problem, the DLM might eventually remove the banding.
Great Deal 
New Comment