Joined in 2023 
82 
63 About this deal
Equipment and protective systems intended for us in potentially explosive atmospheres regulation 2016. To be fitted at the lowest point of the fan scroll to allow water to run away. Thread size 3/8″ BSP, hose connection 12mm Ø. Fan housing predrilled and tapped to hose connector. All the UK bodies that were previously EU Notified Bodies became UK Approved Bodies. UKEX Certification Electric motors are susceptible to over-heating when running on over-load, when their supply or self-cooling air is reduced, when ambient temperature is too high or when any part of the motor surface is thermally insulated by its installed situation. Any one of these conditions could lead to an explosion.
FUNME Handheld Fan Portable Strong Wind Fan Rechargeable FUNME Handheld Fan Portable Strong Wind Fan Rechargeable
Another product from Auto Extract that you can use with a fume extraction fan is a cabinet. Fume cabinets are ideal for situations where maximum efficiency is necessary when extracting harmful fumes. The cabinets are designed to allow operators to see through the cabinet while working, yet protecting them at all times by safely controlling exposure. The fume extract fan will collect and dispose of fumes before they become airborne. Certain environments, such as laboratories, may require fans that can withstand corrosive fumes or explosive gasses. Which can be pre-wired to the motor terminal to ensure first class electrical work in factory conditions and an isolator fan on the indoor or outdoor pedestal. Model FJC-300 is a belt-driven, arrangement 10 unit available in either coated steel and bolted or welded construction, or a galvanized finish and bolted construction. The unit has a compact footprint with motor and drives located under a common weather hood. A corrosion resistant coating allows for use with corrosive exhausts such as those found in wastewater treatment plants, medical instrument sterilization, or isolation rooms. SEAT fume cupboard extract fans are particularly popular in educational facilities, not only because of their resistance to chemical impairment, but also due to their minimal noise emissions, simple control & monitoring, and their easy installation. All speed controllable ATEX motors receive less cooling air on speed reduction and must therefore be supplied with thermistor over-temperature sensors to protect against shell temperature in excess of the motor temperature class. ExclusionsOur fume extraction fans have proven their durability and reliability in the laboratory fume cupboard market and educational settings for over 30 years. Our team of fan integration experts have worked with schools, colleges and universities to select and specify the correct corrosion resistant fan to suit their fume extraction system requirements whilst ensuring competitive pricing and lead times. The centrifugal fan ranges are available in a choice of rotation and discharge angles and include bifurcated inline fans. Our plastic centrifugal fans are capable of handling air volumes up to 25 m³/s and pressures up to 2200 Pa. OEMs, Contractors, Mechanical Engineers and Specification consultants entrust Axair Fans with their industrial fan selection for a wide range of applications including air handling units, water treatment, fume extraction, commercial kitchen ventilation, biomass, fan coil units and much more. Our team of in house technical engineers are experts in their niche field, split into the OEM and Industrial division, your enquiry will be directed to the right team to correct select the fan you require. View all industrial fans using the product selection categories below or search by the main navigation menu. Fore more information or news stories featuring our explosion proof fans in situe and for educational articles visit our news Section.
Funme Mini Handheld Fan, 2023 Mini Portable Fan, Personal
All equipment that is certified for use in a flameproof zone is labelled with a code that defines its limitations to use as a complete UKEX, ATEX or EX rated fan product. The code effectively states the type of environment – above or below ground; the duration of the risk – frequent or accidental; the nature of the explosive atmosphere – gas or dust; the gas group – defined by ignitability; the temperature class – defined by spontaneous ignitability. In addition to our s range of plastic extract fans, we offer a wide variety of general accessories and controllers to complement the range.equipment intended for use in domestic and non-commercial environments where potentially explosive atmospheres may only rarely be created, solely as a result of an accidental leakage of fuel gas. A fume extraction fan is most effective when used in conjunction with other types of products and accessories. Whether you require additional components to go with a fan depends on several factors, including your operational tasks, environment size and installation location. We'll do all this to ensure we fully understand your dust and fume extraction requirements and help you to provide a pollution-free workplace!
Fume Extraction Fans (Chemical Resistant) - Auto Extract Systems Fume Extraction Fans (Chemical Resistant) - Auto Extract Systems
If a ventilation system in a laboratory is not set up correctly or malfunctions it poses a serious health risk and can lead to short and long-term illnesses consequently. Fumes and dust can cause respiratory disease or aggravate a person’s existing condition such as Asthma. A publication by the Health and Safety Authority explains how poor fume extraction design and/or maintenance may lead to pollution exposure in a laboratory rather than preventing it. A poorly designed, installed, misused and incorrectly maintained system can become an expensive waste of school funds and may give a false impression of hazard control. Many employers and employees overestimate the effectiveness of the different types of local exhaust ventilation and have a poor understanding of the types of conditions that could lead to a reduction in or depletion of its effectiveness.
Everyone is familiar with the stylised Ex within a hexagon. This symbol is given in the standards that support both ATEX and UKEX, so does not change. The single coding on a label (familiar from ATEX) applies equally to ATEX and UKEX equipment. During school science experiments and demonstrations, it is commonplace to use fume cupboards. Fume cupboards capture and remove any harmful substances generated and reduce the exposure to a safe level. These include harmful gases, vapours, aerosols and particulates. Older students sitting exams may be required to complete certain hazardous studies to understand how chemical reactions work, this may involve the production of substances such as sulphur or hydrogen, so it is imperative that all health and safety regulations are met. Choosing the correct fume extraction fans for school fume cupboards is crucial for reducing the user’s exposure to hazardous substances during the experiments and demonstrations as the educational setting has a duty of care to protect every student from harm. School and university fume cupboards act as a physical barrier between reactions and the classroom or laboratory. This provides a degree of protection against inhalation exposure, chemical spills and fires. Auto Extract Systems Ltd is the UK’s leading Local Exhaust Ventilation (LEV) company. Over the last 20 years, we've helped thousands of businesses create dust and fume free workplaces. The SEAT S35 models were applied to the extract hoods over the laboratory furnaces. Supplied complete they were delivered with weather pedestals, flexible connectors, anti-vibration mounts and flanges. We also supplied an S20 fan for use with a small specto-analyser.
FUNME Mini Handheld Fan USB Electric Portable Fan Outdoor FUNME Mini Handheld Fan USB Electric Portable Fan Outdoor
We can also pre-wire to electrical isolators to the motor terminal to ensure first class electrical work in factory conditions and an isolator fan on the pedestal. Manufactured from corrosion resistant polypropylene, SEAT fans are both durable and light weight making them easy to install and a more reliable and cost-effective option for chemical laboratories than alternatives in the marketplace. With fume cupboard systems being long term investments within the education sector installers look to integrate the most efficient fans and components. Our range of EC polypropylene fume extraction fans can help designers to reduce fan energy consumption by up to 20% without affecting performance. SEAT polypropylene fans used in school fume cupboards tend to be the smaller fans in our range as schools usually service one cupboard per fan. For laboratories where there are multiple fume cupboards per fan, we can offer a larger solution to suit. All polypropylene extraction fans are directly driven by IEC dimensioned electric motors manufactured to BSN4999-EN60034 Standards and are selected on their capacity for:Chemical resistant fume extraction fans are to be used in conjunction with several products, from our fume extraction, dust extraction or vehicle exhaust extraction range. At-source capture hoods will capture the contaminants in the LEV system and draw them towards the centrifugal fan, and depending on the working process will expel particulates via a filtration unit, or directly to the atmosphere via a high-velocity cowl, as per HSG258: Controlling Airborne Contaminants at Work: A Guide to Local Exhaust Ventilation (LEV).
Related:
Great Deal 
New Comment