USB handbrake, 14-bit USB handbrake Suitable for Racing Games, and Logitech G27 G29 Simulation Performance handbrake 11.8 inches + with Clip (PC System only)

Product Information

For the Trustmaster wheels that do not support a handbrake natively, you can get the DriveHub to make any USB handbrake of the three – Fanatec ClubSport, Thrustmaster TSS or Aiologs handbrake work on Xbox One. Handbrake for Fanatec Racing Wheels on Xbox One A sim racing setup is incomplete without a handbrake. For all the drifting fans out there, and especially for those interested in rally games like DiRT, a handbrake is a very essential accessory. Most people assign the handbrake function to a button on the wheel, which works fine for occasional engagement. It’s only when you’re making hairpin turns, and desperately need to be perfect, you realise that you need a handbrake solution; because every split second matters. Thrustmaster TSS Handbrake Sparco Mod+ is fully compatible with Thrustmaster T300 and T-GT racing wheels on PS4. Alternatively, you can use the Fanatec or Aiologs handbrake with the help of DriveHub accesorry on PS4. The latter is a much cheaper and better option in my opinion. Handbrake for Thrustmaster T80, T150, T150 Pro on PS4

Logitech G29 racing wheel review: The perfect starter set for Logitech G29 racing wheel review: The perfect starter set for

The handbrake can be assigned to a button if so desired, simply press the button you would like to assign the handbrake to when prompted: For all Thrustmaster racing wheels, you can use any USB handbrake like the Fanatec ClubSport, Thrustmaster TSS or Aiologs handbrake by connecting it to the USB port on PC. Handbrake for Fanatec Racing Wheels on PC If you are not sure which type of pedals you have, please consult with the manufacturer. Most pedals that are not advertised explicitly as load cell pedals use potentiometers. Comfortable mounting options – It can be mounted horizontally or vertically, whatever suits your racing style.This is almost always due to improper controller ID setup. Controls are reset whenever the ID of a controller changes. Windows will not save the controller ID unless the controller is set as the Primary controller. All three handbrakes, Fanatec ClubSport, Thrustmaster TSS and Aiologs handbrake work perfectly with Logitech racing wheels on PC when connected via USB. You can use pretty much any USB handbrake with Logitech wheels on PC. Handbrake for Thrustmaster Racing Wheels on PC For all Fanatec wheels, the Fanatec ClubSport Handbrake V1.5 works perfectly on PS4 when connected to Fanatec wheelbase/pedals with the included cable. Alternatively, you can use other handbrakes like Thrustmaster TSS or Aiologs handbrake with the help of DriveHub.

Handbrake with Clamp SIM for Racing muge racing 64Bit PC USB Handbrake with Clamp SIM for Racing

For older Logitech wheels such as the G25, G29, and Driving Force GT, it is recommended to use the following settings after installing Logitech Gaming Software:With the Logitech G29, you get a pedal set including a clutch. With most budget wheels, the pedals don't contain a clutch -- just a throttle and brake attached to the base. In addition to the control calibration and customization options provided by iRacing, most wheels also have their own settings included in their provided software that can help the user fine-tune the feel of their steering. The Brake Force Factor adjustment adjusts the simulator's response to pedal input. By default, the Brake Force Factor is set to the recommended value of 1.80 for potentiometer pedals. If you have load cell pedals, this will need to be adjusted. The Brake Force Factor adjustment can be found in the Options->Drive menu. You can use Logitech Gaming software (LGS) 8.70 and later to assign various commands to the buttons on the G29 and G920 racing wheels. Any time a device is connected to a different USB port, it will require calibration in iRacing, even if it was already calibrated on a previous USB port. For this reason it is not recommended to place controllers on USB hubs or to switch them from port to port.