ELEGOO Saturn 2 8K 3D Printer, MSLA UV Resin Printer with 10 inch Monochrome LCD, Air Purifier and Screen Protector, 219x123x250mm Larger Printing Size

Product Information

Equipped with a 10" 8K monochrome LCD, the Saturn 2 achieves extremely high printing speeds without loss of detail - despite the huge build space. Thanks to the high resolution of 7680 x 4320, all the finer points of a 3D object are also visible on the printed model. The sophisticated cooling system also increases the service life of the monochrome LCD. The display is additionally protected from impacts by a pre-installed, hardened (9H) protective film. One of the most obvious improvements of the Elegoo Saturn 2 is the 8K high resolution screen. The screen is 10 inches, which is a noticeable improvement over the 8.9-inch screen on the original Saturn and the 9.1 inch display that came on the Saturn S. Leveling the printer was pretty straightforward. The first step is to loosen the two bolts on the sides of the resin tank. Then using the control panel on the front of the printer, you want to raise the build platform to a sufficient height that the resin tank can be removed. No matter what type of distortion you go for with [FabFilter] Saturn, it always maintains a creamy and 'producer' sound.

After printing, the model will still likely have some leftover resin on it and, to get a resin print to look its best, you will want to clean it. The Saturn 2 is equipped with dual linear rails along the Z-axis, which ensure high stability. The movements of the build platform run smoothly. The MSLA 3D printer allows you a Z-axis resolution of up to 0.00125 mm. After this, it’s just a matter of generating supports like with the first model and printing it out. vintage sound of tubes, tape, transformers and guitar amps. In addition, you get five creative FX distortion styles to The Elegoo Saturn 2 includes a pretty standard array of accessories that many other Elegoo resin printers ship with including tools such as the diagonal cutters for support removal as well as the metal and plastic spatulas.

Before any version could be put into production, work on all Saturn variants was stopped in favor of launching all future payloads from the Space Shuttle.

To wash the models, I used Elegoo’s largest Wash and Cure station, the Mercury X bundle. Although this was designed with the original Saturn and Saturn S in mind, which have slightly smaller build volumes, I found the build platform still fit into the tank. The only issue I had was with some of the taller prints bottoming out. Finally, FabFilter Saturn 2 contains all the usual FabFilter goodies: perfectly tuned knobs, MIDI Learn, Smart It is best to start by removing the model above the resin tank. I found that using the metal spatula on the build plate worked quite well. The reason you want to remove the model first is to avoid dripping any resin onto the LCD screen, which is very difficult, if not impossible to remove once hardened. The sandblasted build platform guarantees the highest possible adhesion of the print result - the risk of detached, unfinished prints is minimised in this way. The air purifier can be operated with an activated carbon filter via the USB port, effectively filtering odours and vapours. Saturn is FabFilter's most essential efforts yet - and considering the rest of their range, that's really saying something.The popular Elegoo Saturn gets another new edition: the Elegoo Saturn 2! The successor is equipped with a huge 10-inch 8K monochrome LCD, allowing for even larger and more accurate prints. The huge build volume of this MSLA-3D printer makes it possible to print detailed, large-format objects. By applying subtle modulation to crossover frequencies, dynamics, band levels or tone controls, great warmth and definition can be achieved.

There was a large payload gap between the Saturn IB's 46,000-pound (21,000kg) low Earth orbit capacity and the Saturn V's 310,000-pound (140,000kg) capability.

What worked well for me was to start off by washing the item in the water first after printing, then remove the supports while they were still soft. After that, I dipped it in water briefly and used the brush included with the water washable resin to loosen up any more resin residue. I gave it another rinse in the rinse tank in hopes that the water would now be able to get into the nooks to help remove any additional resin. After letting the item completely dry, I then cured it and this prevented any white residue from forming on the prints, which can happen even with the water washable resins. Cleaning Up After a Failed Print on Elegoo Saturn 2 8K It also comes with a set of hex key wrenches and some spare screws in case any servicing or repairs need to be performed during the printer’s lifetime. There are two pairs of latex gloves and two surgical style masks for personal protection, but you will probably want to get some higher quality masks and additional gloves for working with resin. Larger than Saturn's Printing Volume】With a build volume of 219x123x250mm / 8.62x4.84x9.84 inch and a 10” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch. It doesn't matter whether it's a large-format model or several small objects - with a build volume of 219 x 123 x 250 mm, there are hardly any limits to your creativity!