Seagate ST1000DM010 1 TB 3.5 Inch Barracuda Serial Hard Drive

Product Information

Ryzen 3600G with 16GB of RAM https://www.gigabyte.com/Motherboard/B450M-S2H-rev-10 (FreeNAS-11.3-U3.2 on 2 USB of 32GB)

UserBenchmark: Seagate Barracuda 1TB (2016) ST1000DM010

the next lines is EXTRA nothing to do with the problem just to clarificate the problem a bit more as how I fix it temporally url=https://hdd.userbenchmark.com/Seagate-Barracuda-1TB-2016/Rating/3896]Userbenchmark: Seagate Barracuda 1TB (2016) ST1000DM010[/url]trying to format it (wipe with zeros) and I reach any % and the wipeing Disk process stop as it will be finnish

3.5 HDD DATA SHEET - Seagate

Someone ask me to test it with a diferent power Supply but that isn't the problem as I test it with 3 diferent powerSupply (of more enought power) and 2 USB HDD case and fail on all Recently I try to create a FreeNAS server with 3 disks of 1TB (ST1000DM010-2EP102) but I get random restarts of the disks as some dissapear and reappear without touch anything mm/0.787 in (Height), 101.85 mm/4.01 in (Width), 146.99 mm/5.787 in (Depth), 400 g/0.88 lb (Weight)

Firmwaredownloads

core2quad with 8 GB of RAM https://www.msi.com/Motherboard/support/P965_Platinum (FreeNAS-11.3-U3.2 on 1 USB of 16GB) NOTE: the "Hardware ECC recovered" value didn't appear to be right and sometimes that value reset itself and look more like the number of sector read/writes on the disk, I get 62.100 M of errors and today have a raw value of 0x06B9

BarraCuda 3.5 HDD | Support Seagate US

Cost-effective storage upgrade for laptop or desktop computers, Store all your games, music, movies and more with up to 4TB of storage NOTE: I used the core2quad instead of the Ryzen by now as it have more sata ports to can test more things at the same timeI put a laptop near of the server and when I try to create the pool I get this error on the UI interface:

HDD Drive is Showing Up in BIOS and Device Manager but not in

Ryzen 3 3900X with 32GB of RAM https://www.asus.com/Motherboards/PRIME-X570-PRO/ (Linux Debian 10 & Linux Mint 20) I see that... multiple times, but htat was just after clean the screen (pressing enter) and try with the laptop to create the Vdev/pool to temporaly fix the problem, I put the HDD in a USB case than lie about too many things (the name of the HDD) Maak een einde aan de kosten en complexiteit van het opslaan, verplaatsen en activeren van gegevens op schaal. not sure how I can fix it, but now I can think on how to fix it and other people too., the USB case is just a temporal fix, I just use it to testand also isn't on the list of SMR drivers than are here https://www.ixsystems.com/community/resources/list-of-known-smr-drives.141/ are one with the ECC but is with another size of 1.5TB Seagate disk, and is for the old version (ST31500541AS) and that model is twice as high as this one than is a new design Each line must contain only the serial number, a comma, and a model or part number followed by a new line. EasyPC now delivers Nationwide! Express Delivery (4-hour delivery service) is available within Metro Manila Main Server: Dell R510, 2x 6 Core L5640s, Samsung DDR3 64GB ECC Reg, Chelsio T320 HP Dell Quad NIC 4gbp LAG, VLANs 12 Bay Hotswap. 2x Dell Perc H200i flashed to IT Mode