TOPPING MX5 Headphone DAC Amplifier Class D Power Amp 70Wx2 NFCA 1600mWx2 USB/OPT/COAX/Bluetooth/TRS/RCA Input Desktop Home Audio Decoder 384kHz/DSD256 with Remote Control (Black)

Product Information

The only problem I have noticed is that the amp gives out *lots* of RFI over the speaker cables whenever they are in use. No problem when in headphone only mode. Surprisingly the big power supply seems OK. I am a ham radio operator and I could see so much RFI on 40m and 20m that I could actually hear the song being played in AM mode. Some hefty torriods on both speaker cables fixed that mostly. The carrier is still there but the modulation is all but gone so if I want serious DX I need the turn the amp off - or get more torroids. My room is a bit small and rectangular so I haven't been able to really play loud but it's more that enough. Will we be seeing woofer that in their line, or something made for you only? ( prototype for an OEM?) I think they have some catching up to do. I also applaud the front ports as so many speakers are not suitable for "bookshelf" use. ha hozzávesszük, hogy ezt az élményt akár éjjel is élvezhetjük, amikor a gyerekek mondjuk már aludnának, akkor azért könnyen elmagyarázható, hogy miért jó dolog ez a fejhallgatózás. A térérzet egy kicsit más volt, mint a hangfalnál, kicsit talán keskenyebb volt a színpad, viszont a sztereó hatás nagyszerű volt. Jean Michel Jarre zenéjébe újra beleszerettünk például. Összegzés Topping has announced its latest desktop all-in-one DAC/Headphone AMP/Power AMP, the Topping MX5. MX5 is a successor to the widely-acclaimed Topping MX3. It features a premium ESS Sabre DAC chip paired with an XMOS USB processor and a high-performance Qualcomm QCC Bluetooth chip for high-resolution audio signal decoding and wireless Bluetooth input support. Topping has featured NFCA Headphone Amp circuit on the MX5 providing up to 1.6W of output power at 32Ω of load. They have also equipped the MX5 with Infineon Merus Class D Power Amplifier chipset delivering 70W of clean output power for your speakers at 4Ω of load and 10% THD+N, even at high-quality THD+N 1% it outputs 55W of clean power.

I was weighing between because MX5 provides many things in one. So if I were to use it in the future for passive speakers I can continue to benefit from MX5. I have seen quality issues in e.g. Topping DX3Pro+ volume controls. I just received my Loxjie D30 DAC and cannot be more pleased. I was initially concerned that the ESS Sabre chip wouldn’t have as good as sound as my SMSL M200 with AKM-4497 chip. Boy was I wrong! The ES9068AS is Sabre’s only “Current” output chip. AKM 4499 implemented Current output in their chips, be we all know about the AKM shortage. If they can solve some of the issues Amir found in his 2019 review of the MX3 even a little bit it could be an interesting option for some over discreet components.With the help of an Infineon Merus Class D amplifier, the MX5 can output 70W x2 under a 4Ω load with 10% distortion, and 55W x2 under a 4Ω load with 1% distortion. Under an 8Ω load, the MX5 can output 42W x2 with 10% distortion or 35W x2 with 1% distortion. Two custom setting memories, C1 and C2, is convenient to switch between different scenes directly. Long press can memorize the current input selection, output selection, volume setting, bass setting, treble setting, and gain setting. And short press to call out in subsequent applications. It greatly facilitates your use. As the name implies, anything branded as studio headphones is designed especially for a studio setting with a particular focus on accuracy and transparency for monitoring and mixing. Lets say MX5 was last used on USB input before entering standby, then signal is provided on optical input, I understand MX5 will turn on automatically but will it switch to optical or do you have to switch source manually from last used (USB) to the one currently providing signal (Optical) ? A kiváló minőségben legyártott alu készülékház elején egy viszonylag egyszerű, ám minden fontos funkciót tartalmazó kijelző található és a fejhallgatókimenet, valamint egy többfunkciós vezérlő, amivel az MX5 minden fontosabb funkciójához hozzáférünk. Amihez pedig nem, arra ott van az egyszerű, de jól megtervezett távvezérlő. Meghallgatás, hangminőség

You can expect these DAC & Amps to present you with a refined listening experience. The audio quality exhibited by these DAC & Amps is a beautiful mix of musicality, technical brilliance and high precision. You've been looking for a one-box solution and the MX5 can offer great performance with a small foot print as the amp and dac etc are in one case. On my D30, You hold the front knob in while you turn the power switch on. Release the knob. Then rotate it through the menu, pushing to select. Az állatorvosok szerint Bobi, a nemrégiben elhunyt alentejo masztiff nem lehetett 31 éves 2023.10.30. With its ESS SABRE DAC chip, XMOS XU208 USB chip, and Qualcomm QCC3031 Bluetooth 5.0 chip, the MX5 accepts input connections from a variety of audio sources, including computers, set-top boxes, CD players, mobile phones, and more.A Topping MX5 egy nagyon jó kis minden-az-egyben készülék. Azt nem állítanánk, hogy nem találunk a piacon jobb erősítőt, vagy DAC-ot, vagy akár egyben mindkettőt. Ennyi pénzért és ilyen méretben viszont szinte biztosan nem találunk. A Muzix Auidio kínálatában ugyanis ez az eszköz mindössze 152 000 forintba kerül és mindegy, mennyire kicsi, mennyire kínai és mennyire tűnik egyszerűnek, ez egy nagyon jó vétel. Mindenkinek szívesen ajánljuk. DAC & Amps that have volume controls make its operation incredibly simple; turn up the volume on your smartphone or your source devices and then change the volume on DAC & Amps to the desired level. Topping MX5 is a single device that you will need with your desktop system for HiFi audio needs. It has a premium ESS Sabre DAC chip that is supported by a high-quality XMOS USB processor enabling high-resolution 32-Bit/384kHz PCM as well as native DSD256 decoding support. It also houses a high-performance headphone amplifier circuit as well as a class D power amp circuit.

The product is returned in original condition (with brand’s/manufacturer's box, MRP tag intact, user MX5 provides two custom setting memories, C1 and C2. Long press can memorize the current input selection, output selection, volume setting, bass setting, treble setting, and gain setting. And short press to call out in subsequent applications. It greatly facilitates your use. Let us know how the PA3s + DX3 Pro+ works out for you. I can tell you that the PA5 is dead silent, so that's an option too, although the cosmetic match will not be as nice.First time I have had a desktop amp that does well on *both* headphones and speakers. For the last 3 years I have been using a SMSL AD18 - which the MX5 has just replaced. I was never impressed with the USB DAC on the AD18... It did a fine job of amplifying analogue signals but I found it quite poor when decoding audio from USB at any resolution. The real killer was I had begun experiencing loud random white noise episodes at 96Khz. I thought this may be an issue with my new laptop and/or Windows 11 but apparently it is known thing with the AD18 on prior versions of Windows too. Guess I had not used the USB interface at high resolution much. In addition to supporting various digital inputs, MX5 also supports fully balanced TRS and single-ended RCA analog inputs. Greatly expand the scope of application.