Furniture Clinic Wood Stain (White Ash) – Fast Drying, Highly Concentrated, and Easy-to-Apply Wood Stain for All Indoor & Outdoor Wood – Water Based & Non-Toxic – 15ml Tester

Product Information

The importance of finishing the Ash wood is enormous. Here are some major reasons for finishing the Ash wood. Protect The Original Color A. Yes you can. Our Wood Stain has been designed to deeply penetrate all wooden surfaces. However, you’ll always get best results by giving the wood a light sand first with #100 Sanding Pads. Most importantly, Ready exterior stain will penetrate your ash wood surface in several minutes and stain evenly. BTUs (British thermal units) is a unit of heat. It is defined as the amount of heat required to raise the temperature of one pound of water by one degree Fahrenheit. It’s a good idea to test your chosen stain on a scrap piece of the same wood to see the final result before applying it to your project.

Ready Seal 100 Clear is the indisputable champion for staining Ash wood. Its exceptional qualities make it a standout choice.

If you are unsure of the wood stain colour, test it on an unseen area first. The stain can be applied with either a cloth, bristle brush, or for best results a Foam Brush. Apply the stain liberally going in the direction of the grain. Leave it to soak in for a minute or two and then wipe any excess of using a Lint Free Cloth.

Workability: Ash is relatively dense with good working and finishing properties. Its Janka hardness is moderate. Therefore it holds the nail, screw, paint, and polish well. Responds well to steam bending.

10% Off Your Next Order

This not only protects the wood but also enhances the stain’s color and gives it a lovely finish. It’s like the cherry on top of a sundae! Lastly, Varathane's Weathered Gray turned out quite nice after a second coat was applied. It's perfect for that rustic look, or for wood with a nice grain that you want to show off! Medium and dark stains can dramatically change the appearance of ash wood, making it versatile for a variety of projects.

A good finish can protect the natural color of the wood. It does not cover or vanish the color. You can even see the real striation of the wood after finishing. Overall you can get a natural look with moderate or dark colors. Close The Open PoresGreen Ash is convenient to handle, making it ideal for professional and amateur woodworkers. It also features a straight grain pattern, giving your workpiece a sleek, modern appearance. Different types of varnishes, natural oil, and hard wax oil are used for finishing. Here four best finishing liquids are given. Minwax Helmsman Spar Urethane Begin with regular cleaning. Dust can accumulate over time and scratch the surface of your beautiful furniture. Therefore, the stain will easily penetrate deeply into the ash wood surface evenly without making blotches and streaks. Creating all these color samples was actually pretty easy to do, and takes the guesswork out of staining. There's nothing worse than hating the stain you chose and either painting over it or sanding it down and starting over! If I'm working with a new stain color or wood species, I always plan to create samples like these first.