Joined in 2023 
82 
63 About this deal
Vape While Charging is a feature commonly seen in our mods that allows you to vape while you are charging your device. Be advised that while this feature can be convenient, it’s not recommend to vape while charging a device that is extremely low on battery life. Wait until your battery indicator on the screen indicates at least a 40% partial charge or until the charging LED changes to a yellow color before you use this feature. If you Vape While Charging when the battery indicator on the screen shows a low overall charge, you will damage the overall lifespan of the battery.
Use a certified wall charger with a high quality microUSB cable. Monitor the device and verify that it is charging. Wait until the device is fully charged. Note: All batteries have a limited number of full charge cycles. A battery capacity may decrease based on charging and use over time. Note: Make sure that the device’s battery always has some amount of charge/power. Do not store a device with an empty battery as it may damage the overall lifespan of the battery. However I would say this kit is more suited to MTL users.Sure, it will do a restrictive DL, but I would say there are better alternatives out there.For me, this will firmly sit in my MTL rotation.
Test :
C'est un modèle plus puissant. Il boostera tes nuages et délivrera une vapeur plus chaude en bouche ! Make sure coil bottom capes are clamped all the way down and make sure air holes are closed when refilling. No. The CoolFire Z50 uses a standard microUSB charging method that must be charged at 1A or lower using a high quality wall charger. Never leave your device unattended while charging. After I spent a few minutes admiring the elegance of the mod, I turned my attention to the Zlide 22 tank.Visually it’s very impressive and well engineered, the caged design protects the glass from accidents and the slide top looks and functions really well.The AFC (Airflow Control) protrudes ever so slightly which makes it so much easier to adjust when it’s on the mod (a very nice touch). Never leave charging batteries unattended or charging overnight. Never continue to use an e-cigarette type device if you can feel the battery get hot. If your battery gets hot to the touch, or if it begins smelling: DO NOT USE IT ANYMORE. Let it cool down (1 hour) in a safe environment (outside preferably), and then dispose of correctly, or decide to return, if still under warranty. If your e-cigarette or device begins activating itself, immediately remove your atomiser and disconnect the battery.
Please refer to the data protection section of our terms and conditions for information on how we handle data. The navigation on the Coolfire Z50 is rather simple which makes it very easy to change what you need; Batteries are covered by our six-month warranty. If your battery is still under warranty, you can exchange it for an operational one. This warranty applies to the product under normal use. In the event you need to exchange your Innokin product, simply complete theReplacement Merchandise Authorization (RMA)form online.
Do not overfill the tank, or the liquid will get into the central section of the coil and flow out from the bottom of the tank. With the airflow entirely closed off, you are able to receive a tight mouth to lung vape. When the airflow is fully opened, a direct lung hit can be had. The tank is also designed to allow for easy coil changes, even when the tank is full, which means you won’t waste any e-liquid. WHO IS THE INNOKIN COOLFIRE Z50 KIT FOR? If you are experiencing difficulty verifying your details via the instructions sent to you, please follow the guideline below to verify your details; Innokin have always seemed to market their devices at the beginner vaper and the Coolfire Z50 Kit is no exception as the Zlide tank is obviously created for the MTL vape audience. The finish and design of the tank fit seamlessly with the device and creates a rather appealing yet bulky MTL device.
Great Deal 
New Comment