Easy Joint Paving Jointing Compound 12.5kg – Mushroom

Product Information

When you clean the patio hold the power washer at an angle of about 45⁰ degrees and using a fan spray from no closer than 150mm from the paving joint. When applying to porcelain, to ensure an effective joint, the operator MUST strike the joint off, to compact the grout fully. Yes, EASY Joint must have a permeable and strong foundation (one that allows water to pass through to the ground below).

The same rules apply when working with porcelain paving tiles as with working with stone or concrete. Opened tubs of EASYJoint, if not fully used, can be kept for later use providing they are covered by a minimum of 2″ (50mm) or more of water. For the DIY user of EASYJoint it means that you do the work, the jointing of the paving, when you planned to. Note: EASYJoint - for jointing paving - continues to harden for several weeks and achieves its full strength after approximately 1 month.When the water has drained away, a "flicking" motion with a clean soft hand brush (not the same one used to apply the compound) will aid the removal of any loose grains. In terms of application, there is not so much need to use copious quantities of waterwith porcelain as the EASYJoint will not cause it to mark in the same way it can with stone or concrete.

However, there does seem to be a small issue with production where around 10-20% of the tubs have already set before being opened. You will find that a small amount of water, added to form it into a slurry, will make it easier to fill the joints properly. Geoff has over 40 years experience in the hardscape industry and has been involved in some of the most prestigious and groundbreaking projects across the globe.EASYJoint is designed for use with permeable, free draining sub-bases, which allow water to pass through. The result of using EASYJoint, to joint your paving, will be a paving gap that is completely filled that will last for years.

EASYJoint results in a strong paving joint that withstands the elements, and lasts for years, what’s more the solid joint eliminates weed growth! This product was first developed in 2009 and has now evolved to meet user demands and keep up with the latest trends in the industry. We recommend using sufficient water with EASY Joint to turn it into a slurry, it works incredibly well with paving joints of different sizes (minimum 3mm) - View the EASY Joint demonstration videoand see how EASYit is to joint a patio using EASY Joint. Never allow EASYJoint to stand in piles or allow the paving to dry with any remaining on its surface. Apply a final gentle spray of water across the surface to wash off any EASYJoint residue and to aid the final compaction process.It is slightly more cost-effective with a slightly finer grain, so we find it's a little more agreeable in terms of getting it into the joint.

We do not recommend EASYJoint for use on driveways due to the types of sub-base and bedding mortar needed.Detailed instructions on how to joint paving with our sweep in sand can be found on this site or in the EASYJoint tub. The person with the hose should alternate between following the sweeper to aid washing the compound into the joints and moving ahead of them so that the paving is always wet. We recommend the depth of the joints are kept to a minimum of 20mm, if necessary, remove the old joint and top back up with new jointing compound. No it shouldn't if used correctly by following our instructions, however there is always a chance that the Linseed oil will seep into the paving.