12 mm BATH EDGING QUADRANT BEADING SEALING KIT READY MITRED SPECIAL SIZES CUT TO ORDER WATER RUNS BACK IN TO THE BATH NOT DOWN THE WALL

Product Information

Remove old sealant – Use a sealant remover to dissolve the existing sealant, or, carefully scrape at it with a plastic or metal blade.

This section has hundreds of instructional videos showing how to do the easiest of DIY related jobs right up to a full bathroom refurbishment.It should specify that it is suitable for use in bathrooms / wetrooms and contain an anti-mould and bacterial additives such as Kerakoll Fugabella Eco Silicone Sealant or Kerakoll Fugabella AM Silicone Sealant, which are both available from our sister company UK Tiles Direct. Give the area a final wipe down with a clean damp cloth to remove any residual detergent but do not get the area wet. Check the shower tray and walls are completely dry and free from dirt, dust, grease and debris or the silicone sealant will not adhere correctly. Starting from the point the silicone was first applied, place the silicone sealant smoothing tool against the shower tray and tiles.

Made from rubber and designed to remove excess sealant, these handy tools will help you achieve a neat bead of silicone when sealing a shower tray. Usually, fresh silicone should be left to dry or cure for a minimum of 24 hours, although this depends on the brand and type of sealant.Here are some handy tips to set you on the right path and make sure you apply silicone sealant correctly to achieve a professional finish and prevent water leaks. When sealing a bath, follow the preparation advice above but remember that there is one crucial extra step you will need to take before reaching for the silicone sealant. Use gentle pressure to the trigger of the application gun and work towards the front of the shower tray in one continuous, smooth action to ensure application of a uniform silicone bead. Ensure the bead of silicone sealant is continuous and thick enough to fully cover the gap between the shower tray and the tiles.