Cuprinol 1L Garden Shades - Iris

Product Information

The mood you want to create – light, bright shades feel airy and calm, while bold saturated shades are dramatic and inviting. Neutral natural wood tones create a relaxed vibe. MINIMUM OF 2 COATS REQUIRED. SUBSEQUENT COATS MUST BE APPLIED ON THE SAME DAY NO LONGER THAN 8 HOURS APART. IF NOT POSSIBLE, LIGHTLY SAND DOWN SURFACES BEFORE RECOAT TO ENSURE ADHESION. Urban Slate has an upscale, modern aesthetic. It gives a stylish, refined look to any outdoor space. Cuprinol Country Cream Thankfully, I only needed to apply one coat as it applied really well and easily. We have concrete bollards holding up the fence panels and I did consider painting them as well, but in the end, I went with painting a pattern onto them with Iris to create a bit of a feature. Test a small area first for colour and adhesion: Colour the final colour will depend upon the type of surface, previous treatment and number of coats applied. If using more than one can it is advisable to mix them together in a container or finish in a corner before starting a new can. Adhesion: if adhesion is inadequate on previously coated surfaces, lightly sand before application.

During the Spring, I was invited to a Cuprinol event (the wood care partner of Dulux) as they were showcasing their Garden Shades range in the stunning location of the Bourne and Hollingsworth Buildings in London. Against neutral house exteriors or stone, the olive green creates a noticeable contrast for definition. Amazing what a bit of garden paint can do! Cuprinol Natural Stone– Image: @visitnumber7 Apply in dry conditions, above 5 degrees Celsius and when bad weather is not forecast, minimum of 2 coats required. The final colour will vary depending on the surface and number of coats. If adhesion is inadequate on previous coatings, lightly sand before application. Make sure wood has been pre treated with appropriate wood preserver to prevent wood and decay.

Credit limit exceeded

Untreated wood: should be pre-treated prior to adhesion test with an appropriate wood preserver to prevent rot and decay. Cuprinol Garden Shades offer a wide variety of colours and finishes to choose from. Here are some of the best options to consider and where to use them: Cuprinol Fence Paint Colours I present to you my fence! And patchy grass (we’re working on it!) Willow– The pale sage green shade has a very soft, inviting look that complements gardens nicely without overpowering. Willow resembles the colors found in nature. It will give a fence a lush, earthy feel that blends into the surroundings. We put a new fence up around our garden and after a few months over the summer, it was already showing signs of damage. The fence is pine and it desperately needed painting.

As Garden Shades often goes on directly to the wood, without a primer, sometimes it will soak deep into the wood and this can create the need for a third coat. This may be noticeable with rougher woods, open end grains or indeed deep colours. If wood has been exposed and dried out for a long period of time, this may also draw the more of the product away from the surface and into the wood structure.

The greenish-gray beige tone pairs well with bushes, plants, and wood structures in gardens of any style. Cuprinol Olive Garden The soft white tone complements just about any garden style, from traditional to modern. It won’t clash. A beautiful shade of green allows for bright colours to be used in the garden. Cuprinol Willow Sun exposure – Lighter tints hold up better in direct sun over time than darker shades which can fade faster. Olive Garden– If you don’t want to stray too far away from the wood shades of a fence, Olive Garden could work. The natural olive green tone perfectly captures the colors seen in nature. It has an earthy, organic look.