10 mph Speed limit sign - 3mm Aluminium sign 300mm x 200mm

Product Information

United Kingdom and Ireland: Place Speed Limit signs at approximately half-mile intervals where speed is restricted to less than the national speed limit for that class of road.

If you get a court summons or end up in court because you don't accept an offer of a fixed penalty, the magistrate will have to follow sentencing guidelines. This cookie is used by Issuu analytics system to gather information regarding visitor activity on Issuu products. Safety signs are vital because they can help to prevent accidents and injuries. They can do this by:

UK speed limits: the law

Penalties are divided into three bands depending on the offence and any mitigating or aggravating factors. Band A It’s important to remember that speed limits should be treated as an absolute maximum – it’s not always safe to drive at this speed in all conditions. Extended Text Description: Figure 4. Example Regulatory Speed Zone Application Showing Spacing of Signs Transitioning from Rural District to Urban District and Within the Urban District. The bottom section of the figure represents the rural district, and the top section of the figure represents the urban district. A road runs from bottom to top with decreasing speed limit signs with intervals/spacing of 0.2-0.5 miles. Starting at the bottom in the rural district, the first sign says "Speed Limit 55". The next sign moving up the figure is a yellow diamond sign with the text "Speed Limit 40" with an arrow ahead, indicating that the new speed limit ahead will be 40. 0.2-0.5 miles ahead of the yellow diamond sign is the actual speed limit sign which reads "Speed Limit 40". At this point the road transitions into an urban district. The first sign moving into the urban district, 0.2-0.5 miles from the rural district, reads "Speed Limit 35" which is repeated three times, 0.2-0.5 miles apart, followed by the final sign, which reads "Speed Limit 30".) Easy installation: Suitable for wall or wooden fence mounting, our sign can be effortlessly positioned in the most effective location.

For example, if you are more concerned about UV resistance in areas with high visibility and direct sunlight, then you should consider signs that are made of especially durable, UV-resistant material. However, if you know that a certain area has low visibility and will be used quite often during the early mornings, evenings or nights, it is important to prioritise highly reflective speed limit signs. British Columbia, Canada: On long, uninterrupted sections of rural highways, it is recommended that Speed Limit signs be repeated at least every 9 to 12 miles (15 to 20 km). Additionally, a repeater Speed Limit sign should be placed 1000 to 2000 ft (300 to 600 m) downstream of wherever the speed limit changes. Speeding offences are enforced by the police using fixed, mobile or average speed cameras and are generally dealt with using the Fixed Penalty Notice system. The approach speed is shown as a flashing numeral if the approach speed exceeds the posted speed limit by 3 mph (5 km/h) or more. Arizona: Where the speed limit is less than 55 mph (90 km/h), the recommended maximum spacing is given by the formula S = V/6, where S is the maximum distance between Speed Limit signs in miles and V is the speed limit in miles per hour. In rural areas where the speed limit is 55 mph (90 km/h) or greater, the formula is modified to S = V/5.

Minimum speed limits

Section 2A of the MUTCD discusses standardization of location, mounting height, lateral offset, orientation, posts, and mountings. Speed Limit (R2-1) signs, indicating speed limits for which posting is required by law, shall be located at the points of change from one speed limit to another. At the end of the section to which a speed limit applies, a Speed Limit sign showing the next speed limit shall be installed. Additional Speed Limit signs shall be installed beyond major intersections, downstream of egresses from major traffic generators, and at other locations where it is necessary to remind road users of the speed limit that is applicable. Speed Limit signs indicating the statutory speed limits shall be installed at entrances to the State and at jurisdictional boundaries of metropolitan areas. 15 In rural areas, on two-lane highways, Washington State recommends locating Speed Limit signs at 10 to 20 mile (16 to 32 km) intervals. 34

The Locomotive Act 1865 reduced this to just 4mph in the country and an agonising 2mph in the city! The only vehicles that speed limits don’t apply to are those used for fire brigade, ambulance or police purposes while responding to an emergency. Speed limit sign visibility The visibility of the speed limit signs can vary considerably and is important to take into consideration. Drivers do not stop driving when it gets dark, and it is important to consider how reflective your signs will be during all weather conditions and times of the day. Thankfully, things have moved on a bit since then and today UK car speed limits are generally 30mph in urban areas, 60mph on main single-carriageway roads, and 70mph on dual carriageways and motorways. It’s a legal requirement for speed limiters to be fitted to vehicles with more than eight passenger seats, such as buses, coaches and limousines, as well as goods vehicles with a maximum laden weight of more than 3.5 tonnes.For everyone else, speed limits are a maximum, not a target, and a lower speed may be more appropriate depending on the road layout, traffic and weather conditions.