TP-Link TL-PA7017P KIT Gigabit Passthrough Powerline Starter Kit, Data transfer speed Up To 1000 Mbps, Ideal for HD/3D/4K video streaming and Online Gaming, No Configuration required, UK Plug

Product Information

Within two minutes, press the Pair button on another powerline adapter for 1 second. Its Power LED starts blinking. When the Powerline LED turns on, the pairing process is complete. Away from raw speed, I also took a look at power draw, as these are going to be plugged in most (if not all) of the time. The Solwise adapters each drew from 0.06 to 0.12 amps and between 5 and 6 Watts. The higher numbers occurred when data was being transmitted. Interestingly, the TP-Link adapters didn’t vary at all, no matter what was happening, with each taking 0.06 amps and 4 Watts. So, a very slight energy saving. Plug the other powerline adapter into a wall outlet on the same electrical circuit. Wait until the powerline LED turns on. The big problems with powerline networking is that you need to have all the connecting adapters on the same mains ring and transmission can be subject interference. When would you use powerline? Powerline adapters work in pairs. You should have at least two powerline products to build a powerline network. To optimize your network performance, please follow these principles:

For example, I’ve extended my network using the Plug & Play method. Now I want to secure my network.Verify that you have an internet connection by connecting your computer directly to the modem or the router. Powerline adapters may cause intermittent connection of DSL modem router in a few rare cases 03-24-2022 70831 For the past eight years I’ve been using Powerline adapters from Solwise. Indeed, they’re old enough that Solwise don’t even sell Powerline kits any more, let alone provide up-to-date firmware. And, with only the occasional blip, it’s worked really well. Nevertheless, I decided to try out the TP-Link versions to see if, in those intervening years, the technology has moved on. You plug one adapter (it doesn’t matter which, as they’re identical) near to your router and connect an Ethernet cable (provided) between the two. You then plug the other adapter wherever else in the house you need it and use another Ethernet cable to plug that into the device you need to connect to the internet. In my case, my games console. And that’s it. As long as all three lights are green on both adapters, then everything is working just great. Using the tpPLC utility

Make sure the Powerline LEDs are lit on all of your powerline devices. If they are not, pair all powerline devices according to Secure Your Powerline Network by Pairing. Maximale draadloze signaalfrequentie op basis van specificaties van de IEEE 802.11-standaard. De werkelijke draadloze gegevensdoorvoer en het draadloos bereik kunnen niet gegarandeerd worden en variëren op basis van 1) omgevingsfactoren, met inbegrip van bouwmaterialen, fysieke objecten en obstakels, 2) netwerkomstandigheden, met inbegrip van lokale interferentie, omvang en dichtheid van het verkeer, locatie van het product, complexiteit van het netwerk en overhead, en 3) clientbeperkingen, met inbegrip van nominaal vermogen, locatie, verbinding, kwaliteit en toestand van de client. Connect your wired device, such as a computer or game console, to the powerline adapter via an Ethernet cable. To avoid wireless disconnect issue during firmware upgrade process, it's recommended to upload firmware with wired connection unless there is no LAN/Ethernet port on your TP-Link device.For example, I have a router in my house, but there are not enough LAN ports for all my wired devices. I don’t want complex and expensive cabling. People told me that I can solve this problem with two powerline adapters. Plug the powerline adapter directly into a wall outlet. Do not plug the powerline adapter into a power strip, extension cord, or surge protector. Compatible with all HomePlug AV and AV2 Standard Powerline adapters. This product may not be compatible with routers or gateways with firmware that has been altered, is based on open source programs, or are non-standard or outdated. Note: If the Powerilne LED is off, refer to What should I do if the Powerline LED is off? for detailed information.