Lithofin MN Builders Clean 1L

Product Information

This highly active cleanercontains the optimal combinations of different kinds of acid, rust preventing and cleaning agents. Lithofin MN Builders Clean is for removing cement residues from newly installed surfaces, for thoroughly cleaning used surfaces and for removing rust and rust discolourations. Wet the surface with water, then apply Lithofin MN Builder's Clean and allow it to work for about one hour.

Don't forget, if you need any help selecting the right products for your needs, we are here to help! Slipbond has been formulated with extended workability for fixing brick slips and natural stone to a range of substrates. Casdron Enterprises Limited has been the sole distributor of Lithofin products in the UK and Ireland since 1988.Some items such as base aggregates (sharp sand, cement etc) will arrive on a vehicle with crane offload.

This is an important test measurement for paving, but not really for setts or blocks as they are not large enough to bend. Please note that your signature indicates to us that you have received and checked the quantities and products and have confirmed that all is present and correct. During this process the paving will lose some of its flexibility and the key to good quality paving is that it does not lose a high level of resilience during the test cycle.

Access restrictions - In the case that there are access restrictions, for example a car is blocking the dropped kerb where offload would need to take place, the driver may ask you to, if it is yours, move the vehicle, or contact the neighbour that it may belong to. Lithofin MN Builders Clean is suitable for all acid resistant natural stones such as granite, gneiss and quarzite. In all cases, the driver will need to offload the goods from the vehicle quickly and soon after arriving at your property. In the majority of cases, these may be used for the smaller cut pieces you will need for your project.