FLSUN QQ-S 90% Pre-assembled Delta 3d Printer Printing Size Φ255X360mm Lattice glass platform Auto Leveling Touch Screen

Product Information

No BL Touch on this Delta, it is indeed a specific sensor that you have to remove once the plate adjustment is done, it is not necessary to put the sensor back at each print, for my different print tests, I didn’t need to do it again, and I was able to make about 10 prints without any problem. yeah I am on that, but I have no idea what values to change, as they look different in the robinmini config file, the duet firmware is on 3. I’ve used and made 3D printers since the early days, and have spent hours tweaking, this just works out of the box! In principle, the use of this version is not recommended because the firmware lacks important features. All three stepper motors start rotating simultaneously and as soon as a limit switch is reached, only the motor in question is stopped until all three limit switches are finally reached.

The clamps are used to keep the limit switch wires away from the moving parts - an improvement that will surely pay dividends in the long term. FLSUN has recently released their new QQ-S Pro model, an updated version of its successful line that includes many amazing features for both home users or professionals alike!The programs of the song and dance conference are all original works of employees of various departments, presented in four types: "Small Piece", "Song", "Dance" and "Crosstalk". You can recognise this printer because it has a power switch either to the rear of the device (where the power lead is) or to the front, right of the screen. feet) high when assembled, it is recommended to place the printer on a low table from the beginning, depending on your height.

Marlin and MKS firmware also appear to be preconfigured with different values for acceleration and jerk. The good news here, however, is that the printer does at least detect defects or shorted sensor cables. Stuff like setting up printer radius only allows for 105mm etc but when I translate what I need for the duet from the mks robin it exceeds those size restrictions. Due to their length, the cables could get in the way of the axle slides and be damaged by friction or pinching.Since only a small mass has to be moved, the stepper motors can be controlled with high acceleration values. While the layers and extrusions are created more accurately by Marlin, ghosting also increases here. Nevertheless, for the computing hardware in 3D printers, the equations of motion are not easy to solve, because several square roots must be drawn for each motion. Overall the features of this machine are interesting, there is a silent 32bit motherboard, and an auto-levelling sensor, quite advanced features not always found on entry level 3D printers.