Joined in 2023 
82 
63 About this deal
To make the camera work, you need to use the PoE Switch (IEEE 802.3af, 48V Active) or DC Power (DC 12V1 /2A) to power on the camera. These models are discontinued and not sold anymore, they will continue to work with Home Assistant. Then power up the camera while pointing it at the QR code. It takes about a minute to initialize, read the QR code, and connect to your Wi-Fi. Showing the camera in the dashboard
An SSL certificate can still be enforced for external connections, by, for instance, using the NGINX add-on or NGINX Proxy Manager add-on instead of a globally enforced SSL certificate.
Not all camera models generate ONVIF push events for all event types, some binary sensors might, therefore, only be polled.
ONVIF push will result in slightly faster state changes of the binary motion/AI event sensors than ONVIF long polling. A822, ALL, Argus, Argus PT, B500, B820A, C1 PRO, c1pro, C1-Pro, C2 Pro, C2-Pro, D800, Duo, Duo 2, Duo 2 Wifi, E1 outdoor, E1 pro, e1 pro PTZ, E1 pro sub, E1 Zomm, E1 Zoom, Inside, Other, RCL-410, RCL-410-5MP, rcl-420, RCL-510WA, rcl-511, RCL-520, rcl-522, RCL-810A, REOLINK C2, Reolink RCL-410, REOLINK RLC-423, reolink: rlc-410-5mp, Reolink-820a, rlc 410w, RLC 482a, rlc 510, RLC 520, RLC 842, RLC-1220A, RLC-410, rlc-410-5mp, RLC-410-5MP, RLC-410W, RLC-410WS, RLC-411, RLC-411WS, RLC-420, rlc-420-5mp, RLC-420-5MP-V2, RLC-422, RLC-423, RLC-423WS, RLC-510A, RLC-510AW, RLC-510WA, RLC-511, RLC-520, RLC-520-5mp, rlc-520a, RLC-522, RLC-542WA, RLC-810, rlc-810a, rlc-810c, RLC-811A, RLC-812A, rlc-820a, rlc822a, RLC-822A, rls-410s, RTC-410, RWC-511, w511 Do not point the camera toward a glass window. Or, it may result in poor image performance due to the window glare from infrared LEDs, ambient lights or status lights. This integration creates a few camera entities, one for each stream type with different resolutions: Main, Sub, Ext, Snapshots Main, and Snapshots Sub. Reolink UID (based on P2P) can be used for the set-up and remote access of Reolink cameras and NVRs. If you get Login failed/Connection failed/Timeout error message when trying to remotely access the camera via the UID, please follow this guide for a simple troubleshooting. (Please make sure you can log into your device on the LAN before the troubleshooting.)Please note that the optimum distance between the camera and the PoE switch/Reolink NVR is 300 feet. There are several possible causes for Micro SD Card Not being Detected on Reolink App. You may follow the troubleshooting tips listed below to solve the problem.
Argus Eco, E1 Outdoor, E1 Pro, e1 pro PTZ, RC410, RCL-410, RCL-810A, reolink: rlc-410-5mp, rlc 410w, rlc-410-5mp, rlc-411ws, RLC-423, RLC-510A, RLC-511, RLC-520, RLC-520-5mp, rlc-522, rlc-810a, RLN16-410
iSpyConnect has no affiliation, connection, or association with Reolink’s products. The connection details provided here are crowd sourced from the community and may be incomplete, inaccurate or out of date. We provide no guarantee or warranty that you will be able to connect to your cameras using these URLs. If you just receive your new camera and are not familiar with the camera, you can have a look at the below video about unboxing, setup and installation of the camera. In some camera models, there is a delay of up to 5 seconds between the turn-off command and the sound stopping. The siren turn-on service supports setting a volume and a duration (no turn-off service call is needed in that case). Switch entities Or if you want to make Reolink NVR work with the camera, its connection diagram will be like below: However, these cameras can work with this integration through an NVR in which the NVR is connected to Home Assistant.
For redundancy, these sensors are polled every 60 seconds together with the update of all other entities. When the floodlight entity is ON always ON, when OFF controlled based on the internal camera floodlight mode (Off, Auto, Schedule), see the Floodlight mode select entity. Do not place the camera in a shaded area and point it towards a well-lit area. Or, it may result in poor image performance. For better image quality, please make sure that the lighting condition for both the camera and the captured object is the same. C1 Pro, DUO POE 2, E1 pro, RCL-511W, RCL-520, RCL-810A, Reolink 411, reolink: rlc-410-5mp, rlc-410-5mp, RLC-510A, RLC-520, RLC-520-5mp, rlc-810a Solution: Please test the Micro SD card on your computer and see whether the Micro SD card can be read and written. If it doesn't, please use another Micro SD card to see if it works.Step 1. Use the mounting hole template to drill mounting holes on the ceiling, and plant the rubber anchorings into the mounting holes. You may power on Reolink PoE cameras via PoE injector/switch or PoE NVR directly, or by using the power adapter. When IR light entity is OFF always OFF, when ON IR LEDs will be on when the camera is in night vision mode, see the Day night mode select entity. Sensor entities
Great Deal 
New Comment