Clearwater CH0018 Lay-Z-Spa Chemical Starter Kit for Hot Tub and Spa Water Treatment (Includes Chlorine, pH Minus, pH Plus, Foam Remover and Test Strips)

Product Information

pH minus is used to decrease the pH level of the water. The pH minus is an effective way to keep your hot tub’s pH levels lower, reducing the alkalinity and producing a more relaxing bathing experience. It’s the best way to avoid itchy skin or stingy eyes.

However, the bottom line is that maintaininga hot tub is not a cheap activity. It is a constant expense and something that you should really know about. This pool chemical starter kit is the safest means of sanitising your hot tub without worrying about putting the excess in your pool. There are two ways you can put chlorine in the hot tub: Make sure that the water temperature is 20-degrees. Add two teaspoons of chlorine per 200 gallons of water. Let the chlorine dissolve in the water.So, disinfect your hot tub with chlorine first and then control the pH level with pH minus or pH plus and test the pH levels with a test strip. Don’t wait too long to compare, as the test strip colour will continue to change with time. Keep your test strips stored in a cool, dry place. Acid can cause the surface and equipment to wear away and reduce your ability to control total alkalinity. The acidic water can cause harm to you and your family members’ health.

The award-winning Clearwater® Hot Tub Chemical Starter Kit is a fantastic option for new inflatable hot tub owners and is an easy-to-understand introduction to the world of water treatment. For starters, there is the hardware of the tub. Once you get through that phase, water management is done by using spa chemicals. Suppose your hot tub or spa sees daily use. In that case, you’ll know just how difficult it can be to keep your pH levels balanced, especially with the constant changes the water experiences due to the body oils, lotions and any other contaminants that your guests leave behind.Coming up are our favourite chemicals for spas, but for now, see why you need to keep hot tubs in pristine condition… Remember total alkalinity can also affect your PH level so you may need to increase and decrease that too. Add 50ml of foam remover directly to the tub water. Please ensure that the ventilation system is running while you’re applying the foam remover. It will help distribute the formula within the spa water. 5. Dip Test Strips Along with filter changes swimming pool and hot tub, chemicals are an essential part of your spa maintenance and help ensure you enjoy hot tub benefits as well. You need something like Bromine or Chlorine that kills bacteria and keeps the water balanced otherwise you will end up with issues. Even if you’re buying cheap Chlorine or chemicals, they are going to be far less expensive than hiring a hot tub maintenance service to come out and do it for you. Organic Options

First, test the pH and alkalinity level of the water. If one of these levels are imbalanced, you need to use the foam remover. Shake the bottle before using the foam remover. Chlorine is the most significant element of a spa chemical starter kit. It is usually used in households as bleach. Along with Bromine, consider it as the most effective sanitiser for your hot tub. Apply Chlorine to your hot tub to kill bacteria and keep the water safe and clean.Parts per million (ppm) is how chlorine is measured in. On average, chlorine levels should be between 1.5 and 3.0 ppm. 2. pH Minus Some wonder if they are putting the right amount of chemicals in the water or not. It depends on the hot tub’s size. Also, 5 to 8 parts per million are what you should aim for. Finally, use the foam remover to manage or prevent excess foam from the water. The test strips will help you balance the water levels and ensure the tub water is safe and hygienic.

You might be wondering what chemicals you need for a Lay-Z-Spa. In reality, there are only 2 or 3 essential chemicals needed for a hot tub. These are explained below. Any others will be to help with clarity and cleaning. Do I Need To Put Chemicals In My Lay-Z-Spa? pH Plus is another component of the Lay-Z-spa chemical starter kit. If your hot tub’s pH level is low, it means your hot tub is getting acidic. Balancing the water makes your bathing experience more relaxing and increases your hot tub’s lifespan. Risks Related To Clearwater Hot Tub Chemical Starter Kit Hot tub chemicals might sound complicated. But, in reality, getting the chemical balance right in your hot tub, and then maintaining it, really isn't as daunting a task as many assume. If this is all new to you, our Lay-Z-Spa Chemical Maintenance Guide is the perfect place to get started after you've finished reading this article. It is easy to apply, and the instructions on the kit are simple and easy to follow. The kit includes: 1. Chlorine

Stay up to date

Using a PH decreaser or increaser will result in a ph level that is optimum for both the pool’s hardware and prevents skin irritation Remember these chemicals for swimming pools and hot tubs are toxic so always store hot tub chemicals safely away from children and pets To keep your spa water clean with the perfect balance, you need to have knowledge about different spa chemicals and do regular spa water testing to ensure the balance is safe for you to soak in. Consider using clearwater hot tub chemical starter kits to increase the pH level. In that case, using pH plus comes in handy. Add two teaspoons per 1000 gallon water. Use a jug to dissolve warm water and distribute evenly throughout the tub water. Leave for a minimum of 2 hours and then retest the water to ensure that the pH level is between 7.2-7.6. Add more if needed. Run the pool pump for at least an hour before testing to get an accurate reading. Dip a single test strip into six inches of water. Shake the excess water off while removing it from the pool.