Ubiquiti UniFi HD In-Wall 802.11ac Wave 2 Wi-Fi Access Point 4 Port Ethernet Switch, UAP-IW-HD

Product Information

PoE+ input is required to use PoE passthrough. Connect this port to a UniFi Switch with PoE that is connected to your LAN and DHCP server. The only thing odd to me so far is UniFi shows wired clients connected to my main switch (US-16-150W) instead of UAP-IW-HD. I have a printer and a NAS box plugged into the UAP-IW-HD. UniFi shows them connected to the main switch's port feeding the UAP-IW-HD. While technically correct, it would prefer it show then connected to the UAP-IW-HD.

UAP-IW, UAP, UAP-LR, UAP-PRO, - Ubiquiti Models: UAP-IW, UAP, UAP-LR, UAP-PRO, - Ubiquiti

The quoted wireless specification is given as the maximum radio performance. Achievable range and throughput will vary depending on the regional regulations where the radio is deployed. Ethernet port supports data and PoE passthrough (requires 802.3at PoE+ input). The maximum PoE passthrough output is 12W. These three 10/100/1000 Ethernet ports support data only. Used to connect client devices to the LAN. Superior Processing Power The UniFi IW HD AP is capable of complex operations (guest control, filtering, and other resource-intensive tasks) that may slowdown a lesser-equipped AP.Build wireless networks as big or small as needed; start with one and expand to thousands while maintaining a single unified management system. Use the configurable reporting and analytics to manage large user populations and expedite troubleshooting. Approximate maximum EIRPs for each AP. Actual Transmit power and gain may be lower depending on your channel width, frequency, and specific hardware details. To get your AP's exact Tx power level run iwconfig in an ssh session. Gain values are relative to a theoretical perfect omnidirectional antenna, and are subject to the radiation patterns of the antennas in the device.

Ubiquiti UniFi HD In-Wall 802.11ac Wave 2 Wi-Fi Access Point

MIMO access point with 4-port Gigabit Ethernet switch for high-density environments. Fits into wall outlet. Four ports are available for bridging – one of which offers PoE passthrough when the AP is powered by an 802.3at PoE+ switch. The UniFi UAP-IW-HD access point can be conveniently powered by an 802.3af or 802.at compliant switch. Ubiquiti UniFi AP IW HD (In Wall) is an 802.11ac Wave2 MU-MIMO access point that is ideal for hospitality or multi-room deployments. The UAP-IW-HD provides 4x4 MIMO at 5GHz and 2x2 MIMO at 2.4GHz for a combined PHY rate of 2033Mbps. An electrical wall box should be pre-installed with an Ethernet cable running from the box to a UniFi Switch with PoE.

Protect ViewPort

When comparing the UAP-AC-Lite, UAP-AC-LR, and UAP-AC-Pro (all ac Wave 1) for example, in a clear environment the LR is usable at further distances, but in any congested environment that just means the AP will be able to receive more interference, making it less useful.