Hikvision DS-7608NI-K2/8P network video recorder

Product Information

I couldn't find my old Zalman Fanmate-2, but if I could I've had used it, just connecting it in line to the flan. A 92 mm fan at 12v moves a lot of air, way more than needed having taken the power supply out of the box. This would let you reduce the fan to 7v or 5v (or where-ever you wanted really) Big fans at 5v really are very very very quiet and still move a decent amount of air. Adopt stream over TLS encryption technology (enhanced SDK service and RTP over HTTPS protocol) which provides more secure stream transmission service (max. 128 Mbps TLS stream outgoing bandwidth) You can look at our article about the New Version 4 Firmware for Hikvision NVRs if you'd like more information.

In general if you aren't comfortable with working with electricity, a voltmeter and a soldering iron stop. Or if think your boss will object to what you're doing with the kit, or the PAT tester might next time they visit the office also stop! HDMI Output 4K (3840 × 2160)/30 Hz, 2K (2560 × 1440)/60 Hz, 1920 × 1080/60 Hz, 1600 × 1200/60 Hz, 1280 × 1024/60 Hz, 1280 × 720/60 Hz

Specification

So there would be a lot of things that could be done to improve this from my PC silencing experience, and I would have liked to have done with more time and energy, but I was in a hurry to shut the thing up. But if you're doing something similar, you might want to consider...

For some users this may be enough of a reason to make the jump from the -K to the -I series. For others, it may not be an issue but it's something we like to mention so that our customers are aware! Face Picture Library Up to 16 face picture libraries, with up to 20,000 face pictures in total (each picture ≤ 4 MB, total capacity ≤ 1 GB) To summarize the above points, either the -K series or -I series NVR would be a great choice unless you were looking to use above an 8MP camera. If you'd like to see some different resolution's compared please see our post on differences in camera resolutions.In November 2017 there was a new V4 firmware release for Hikvision NVRs which changed the user interface dramatically. However, this firmware was only made available to the -I series NVRs and this is still how the situation remains today. We aren't sure whether this firmware will be made available for the -K series. Recording Resolution 32 MP/24 MP/12 MP/8 MP/6 MP/5 MP/4 MP/3 MP/1080p/UXGA/720p/VGA /4CIF/DCIF/ 2CIF/CIF/QCIF cameras are rare and tend to be something like a DS-2CD63C2F-IVS Hikvision Fisheye camera. However, 12MP spread across a 360° field of view isn't actually very impressive and the image would seem of low quality. I wired the fan into the same 12v power rail and hot glued it to the bottom of the case where the holes are.

HDMI Output 4K (3840 × 2160)/60Hz, 4K (3840 × 2160)/30Hz, 1920 × 1080/60Hz, 1600 × 1200/60Hz, 1280 × 1024/60Hz, 1280 × 720/60Hz, 1024 × 768/60Hz Cutting a hole for the fan (especially if you had a second hard drive so couldn't use the existing vents) might be good. There is lots of room when the power supply comes out to do this in either the lid or the base. There are enough holes in the base for this to work fine without if you don't need the second drive, but a nicer hole, a fan gasket and some fan mesh would be better. Cutting neat holes in aluminium isn't straight forward at home, so a fit from the outside fan mesh which covers your work is a nice thing. Adding nice connectors to be able to plug and unplug the two power supplies, and closing off the old hole where the power connector is. Mine is basically wired into a cupboard so I'm not too fussed. But you can have some grasping cable entry grommits and there are screw holes around the hole to fit a plate. That would definitely be a good thing to do. Centralized management of IP cameras, including configuration, information import/export, real-time information display, two-way audio, upgrade, etc. Like many other threads on here, I found my new DS-7608NI-K2-8P unbearably loud. It has a channel well technologies PSU (KSA-180S2) with a 12v 5A rail, a 52v 2.5A rail and a really noisy 40mm fan, and then a second not-quite-as-noisy 40mm fan on the case.Incoming Bandwidth and H.265+ - You may be wondering how you're supposed to know whether 80 Mbps worth of incoming bandwidth is enough bandwidth to support your 8 cameras. Below is a guide to roughly how many Mbps are needed by 3MP, 5MP and 8MP cameras from the Hikvision EasyIP 3.0 (G1) Family: This device does not come with any HDD installed and has no HDD capacity. However, it can support up to two HDDs with a maximum storage capacity of 12 TB. It has a Serial ATA HDD interface. Furthermore, it has 9 Ethernet LAN (RJ-45) ports.